Ronald Dillow
Jet Boat Addict
- Messages
- 46
- Reaction score
- 22
- Points
- 97
- Location
- Carpentersville, Illinois
- Boat Make
- Yamaha
- Year
- 2002
- Boat Model
- LX
- Boat Length
- 19
Thanks! That was my guess too... I have a call into Don at ISSPRO to see what he says.
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Fuel Senders for the LS / LX series boats. Mine was for the LS2000 (99')
I spoke to ISSPRO today, they MFG the original fuel sender for the LS2000 boat model. plug n all (12.5" long stem/sender) Spoke to Don in Technical support, he has the exact model for replacement with all the new technology to accommodate the ethanol and fuel additives. I found ISSPRO name and P/N on the sleeve for reference. Plug n play setup. $110.48 + freight. 1-888-447-7776
He informed me failure is due to the newer fuel additives and corrosion properties not present during the time frame of MFG. in 2000' All the new units are up to today's standards. Cheers to them.
If it's a ISSPRO unit, call Don First, they can duplicate all models in house if not in stock. Some members bought the generic version that's 1/2" shorter, that's fine but not reading the exact amount of gas left in tank can be a burden.
Just call ISSPRO they are fantastic with their product knowledge and customer service. If you have the info from the old sender or just pics of the top where the wires connect and the overall length you need they can make it for you or sell you something close from their stock. I had them send me the off the shelf model that's a little short...that's my reserve tank...I rarely let it get below 1/2 a tank anyway to keep condensation from forming.would this fit a 2004 lx210?