• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Usage for hash tag: 3?

  1. Julian

    HVAC gurus here? (Home warranty anyone?)

    ...discount to $1516 because we have a service contract with them. So now we have: HVAC $4300 Repair Dog....blown knee TPLO surgery $4500 What is #3? I did get a great ACA quote on health insurance....so that's great!!!! But these stingers always come in threes. Maybe I can count paying...
  2. W

    Port engine milky oil 2006 AR210 MR1

    @CaptRedbeard I may have missed it but what did you do to repair the corrosion canal between the water jacket and cylinder #3? I used jb weld for a similar milky-oil problem. It seems to be working so far. Is that what you did? Thanks...
  3. CaptRedbeard

    Port engine milky oil 2006 AR210 MR1

    ...assumed water) on plug #3. I didn’t mention that I changed all 8 plugs when the oil was changed in April. Is the consensus that there is water intrusion in the combustion chamber of cyl #3? I plan on testing compression and changing oil/plugs when I get back to my garage and can gather the...
  4. zipper

    Spark plug blew in half

    Was it on cylinder #3? It has been known for seizing plugs. I don't know why a new plug would break other than fake ngk's, they exist, or not installed properly.
  5. zipper

    Please welcome a new Yamaha Jetboater ..

    AR230, which cylinder #3? You are going to need some work on the bottom, WOW. good canidate for a keel guard.
  6. B

    Drain plugs - 2016 FSH 190

    ...The previous owner told me to keep #3 closed but #2 open, obviously keep #1 closed. Is that correct? Q2 - What’s the difference between #2 and #3? Q3 - Where do all these drain to? I assume there’s an area under the boat and engine compartment, and on top of the haul. I also assume this...
  7. BigAbe75

    Little Help plz! wakeboard tower base missing pivot pin

    The pivot pin or the locking bolt? https://www.babbittsonline.com/oemparts/a/yam/5b85695287a8660b20517cf6/wakeboard-tower You’re not taking about #3? You’re talking about the pin that goes in to the mount plate (4), correct? I don’t see that pin here, either.
Top