1. Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

How to replace a broken (or waiting to break) plastic scupper

Many of our boats have plastic scuppers (this is the part that the drain hose from your cockpit is connected to on the outside of the boat) that crack and can leak large amounts of water into the boat. Here are some threads on how to replace the plastic scupper with a Stainless one:

  1. Scuppers--How to install new SS Scupper
  2. A Thread with more photos and part #'s
  3. A thread on borrowing pre-made scupper wrenches to fit in the small gap in the bilge.
  4. Another thread on how to do it.
  5. A discussion on if this needs to be done on models where the scupper is higher (240 series, new 210s 190s etc)
Category:
Maintenance-replacing broken/damaged parts
Published:
Jun 26, 2015
Page Views:
1646
FAQ Manager ©2017 Iversia from RPGfix.