• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

ISLAND RACING PIN KIT

ISLANDRACING

Jet Boat Addict
Vendor
Messages
96
Reaction score
107
Points
122
Boat Make
Yamaha
Year
Other
Boat Model
Other
Boat Length
Other
A brief story:
There is a reason we use a pin on each side of the plug.
The answer is simple.
Because if you only use one pin the other "locking dog" still moves!
Do the test for yourself. With only one pin installed on one side of the plug, push the button. If the button unlocks or there is any movement whatsoever, that leaves the chance for a blowout.
With our kit, BOTH sides of the plug are "pinned"! When installed correctly you can literally push the button and it will relock itself back into place WITHOUT pushing back down on the "T".
We "test" the one pin method literally every time we do an install of the pin kit when drilling the holes on the bench.
ONE pin= movement = unacceptable! Two pins= no movement=perfictally locked!
The only down side is that the pins can be tricky to install, nothing a pair of long needle nose plier couldnt remedy.

 

Glassman

Jetboaters Admiral
Messages
2,238
Reaction score
1,943
Points
267
Location
Redondo Beach, California, U.S.A.
Boat Make
Yamaha
Year
2004
Boat Model
AR
Boat Length
23
ISLAND RACINGCLEANOUT PLUG PIN KITIR-CPPK $28.95

Is that for both sides? If it is that's a damn good price for SS pins and you do all the labor to swage the cables and all.
 
Top