• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Check Engine message

Terrance

Jet Boat Addict
Messages
53
Reaction score
20
Points
97
Location
Porters Lake Nova Scotia Canada
Boat Make
Glastron
Year
2015
Boat Model
GT
Boat Length
19
Hello all Glastron Captains. I have a questions pertaining to the chech engine. I own a 2015 Glastron GT187 with the 1.5 liter Rotax. The check engine message came on last year and the dealer replaced an 02 sensor and the issue was remedied. After 70 hours of boating and dealer service during this time, the check engine light came on again. Has anyone else had trouble with this issue and what about 02 sensor going often?
Thanks Rodeo.
 

NavyShooter

Jet Boat Junkie
Messages
96
Reaction score
143
Points
127
Location
Windsor Junction, NS
Boat Make
Glastron
Year
2015
Boat Model
GT
Boat Length
18
Hi Terrance, I'm guessing you bought yours about the same time, and probably from the same place as I got mine. (IW Marine?)

I got mine at the 2016 boat show, it's the same GT187, 1.5L Rotax.

I have an occasional check engine light, it's not on solid, only comes in now and then, no visible impact on how it runs.

What part of NS are you hiding in?

Brad
 

Terrance

Jet Boat Addict
Messages
53
Reaction score
20
Points
97
Location
Porters Lake Nova Scotia Canada
Boat Make
Glastron
Year
2015
Boat Model
GT
Boat Length
19
Hey Navy Shooter. Thanks for the reply. My engine light stays on all the time. Only when I press one of the two rubber buttons does it go out for a few minutes and then returns. We run our boat, mainly on Porters Lake where we live.
How about yourself? Cheers
 

NavyShooter

Jet Boat Junkie
Messages
96
Reaction score
143
Points
127
Location
Windsor Junction, NS
Boat Make
Glastron
Year
2015
Boat Model
GT
Boat Length
18
Hi Terrance,

Mine comes on now and then, then clears when I hit one of the buttons too. In an hour of running, it might come on 4-5 times maybe?

Our boat has about 25 hours on it now (last summer we were too busy with everything but boating, so we didn't spend much time on the lake.)

We're up on Third Lake, Windsor Junction area. I had the boat out in Halifax Harbour earlier in the season for a couple of rides. Good fun.

If you're interested, there's a USN Carrier coming in this week....neat to see something that big in the harbour!

NS
 

NavyShooter

Jet Boat Junkie
Messages
96
Reaction score
143
Points
127
Location
Windsor Junction, NS
Boat Make
Glastron
Year
2015
Boat Model
GT
Boat Length
18
Just speaking with my motor guy (Ricks Powersports) and his suggestion is to keep an eye on battery voltage. He thinks that might be what's happening with mine. My meter is showing about 13.6V or so, and he said it should be up over 14. Battery might be the problem, or a voltage regulator problem.

I'll do a dynamic check out on the lake tomorrow with it....see what it's actually reading at the terminals when the motor's running with my multi-meter.

NS
 

Terrance

Jet Boat Addict
Messages
53
Reaction score
20
Points
97
Location
Porters Lake Nova Scotia Canada
Boat Make
Glastron
Year
2015
Boat Model
GT
Boat Length
19
Thanks for the reply Brad. Last year I did notice the voltage was very high one day. It went back to normal later.
Let me know what yours reads tomorrow. Thanks
 

Kyle Mekulik

Jet Boat Lover
Messages
57
Reaction score
21
Points
72
Location
Newburgh New York
Boat Make
Glastron
Year
2015
Boat Model
GTS
Boat Length
18
you should be able to read the check engine code in the menu on the right gauge its in one of the sub menus
 

Terrance

Jet Boat Addict
Messages
53
Reaction score
20
Points
97
Location
Porters Lake Nova Scotia Canada
Boat Make
Glastron
Year
2015
Boat Model
GT
Boat Length
19
After taking the GT 187 to our dealer, Iron Wind Marine, they found that the meter itself was the problem and not a sensor. There was no check engine code in the diagnostic code reader Kyle...thanks however for the suggestion.
 

Schmellyz

Active Member
Messages
7
Reaction score
0
Points
40
Boat Make
Glastron
Year
2016
Boat Model
GTS
Boat Length
21
Boat is not starting out new battery in any idea?
 

Schmellyz

Active Member
Messages
7
Reaction score
0
Points
40
Boat Make
Glastron
Year
2016
Boat Model
GTS
Boat Length
21
Hey Schmelkzy. Could be your starter or the voltage regulator. Perhaps the ignition switch?
Cheers Terry
Ok their is gas where the spark plugs are more then norm what could be the issue ?
 

Schmellyz

Active Member
Messages
7
Reaction score
0
Points
40
Boat Make
Glastron
Year
2016
Boat Model
GTS
Boat Length
21
Have a lot of gas where the spark plug are what could this possibly mean ?
 

NavyShooter

Jet Boat Junkie
Messages
96
Reaction score
143
Points
127
Location
Windsor Junction, NS
Boat Make
Glastron
Year
2015
Boat Model
GT
Boat Length
18
Try resetting your kill switch. I've heard mention that sometimes that's a problem for people!
 

Schmellyz

Active Member
Messages
7
Reaction score
0
Points
40
Boat Make
Glastron
Year
2016
Boat Model
GTS
Boat Length
21
Where is that located
 

Terrance

Jet Boat Addict
Messages
53
Reaction score
20
Points
97
Location
Porters Lake Nova Scotia Canada
Boat Make
Glastron
Year
2015
Boat Model
GT
Boat Length
19
The kill switch is located about four or five inches in front of the throttle, on the side of the boat, not on the dash.
There is a small knob about a half inch long. There should be a little plastic clip (lanyard). attached to it. Normally a red string is tied the the lanyard clip. It’s meant to be pulled off is the driver has fallen away from the boat controls.
See diagram and kill cord instructions.

 

Attachments

Schmellyz

Active Member
Messages
7
Reaction score
0
Points
40
Boat Make
Glastron
Year
2016
Boat Model
GTS
Boat Length
21
How much gas should their be where the spark plugs go?
 
Top