Drain plug led Diablo Royal ??

Pinhacker71 said:

View attachment 53797

Click to expand...

@Pinhacker71 I got the dagon for Father's day. Planning to install this weekend. Did you have to add any wire or was the wire that came on it long enough? If you added, was it anything special or just 16awg 4 conductor. Thanks!

JTC1016 said:

@Pinhacker71 I got the dagon for Father's day. Planning to install this weekend. Did you have to add any wire or was the wire that came on it long enough? If you added, was it anything special or just 16awg 4 conductor. Thanks!

Click to expand...

You'll need power cable and a jumper wire. And hopefully they sent you the IR remote because the app doesn't work.

Nick Hughes said:

You'll need power cable and a jumper wire. And hopefully they sent you the IR remote because the app doesn't work.

Click to expand...

Thanks Nick. Where did you mount your controller and resistor? Thanks for the heads up on the app. I do have the Remote.

In the engine compartment, port side. Right below the throttle. I would have rather it be in the battery area, but the cable was not long enough.

I needed more wire. App doesn't work anymore so need to open engine compartment to turn on or change colors. Pain in the butt.

Pinhacker71 said:

I needed more wire. App doesn't work anymore so need to open engine compartment to turn on or change colors. Pain in the butt.

Click to expand...

If you have the remote, why do you need to open the engine compartment to do anything? Our remote works from pretty much anywhere near the boat (inside or out) and the remote receiver is located under the seat where the battery switch is located.

Came with app to use as Bluetooth remote with phone. App makers haven't updated app so it doesn't work. They sent me a remote as a temp fix. Has to be pointed to controller to work. They said I would have to buy a different Bluetooth controller to get Bluetooth until/if app maker updates it. Said they have sent out 600 remotes as temp fixed.

luckie_529 said:

I just ordered this adapter for my boat.

Click to expand...

Hey Luckie_529,
What light did you end up getting with your adapter? Did the adapter and light fit behind your articulating keel? I'm thinking about getting an Electra and that adapter...

@cozilla
@Scuba_ref

So I installed my blue sea fuse panel
The 1st item I'm powering off it the blue sea is my typhoon drain plug light.

I keep blowing fuses in the blue sea just trying to switch on the drain plug light? I've tried up to a 25amp fuse.
I'm not sure what the hell im doing wrong

wire awg size?

paratrooper39 said:

wire awg size?

Click to expand...

I had a bad switch. It's good now. I had to take a 5 min breather to head my thoughts straight. Lol

after I said that I realized that if it were wire issue then the wire would likely burn up if you were already increase the fuse size. Glad you got it sorted.

I just got two adapters and 2 Blue Typhon drain plug lights and the wireless controller in the mail. Going to install this weekend, only thing I am on the fence about is how I am going to wire it to power. I assume since I have the inline switch(remote) I can just wire the lights directly to the battery? How did you guys wire yours?

EmeryZ28 said:

I just got two adapters and 2 Blue Typhon drain plug lights and the wireless controller in the mail. Going to install this weekend, only thing I am on the fence about is how I am going to wire it to power. I assume since I have the inline switch(remote) I can just wire the lights directly to the battery? How did you guys wire yours?

Click to expand...

@EmeryZ28 I just installed my Dagon RGB last week. I wired mine with a rocker switch inline that I mounted in the battery compartment with the resistor and controller. I just wanted the extra security that if my kids play with the remote I won't burn the thing up. I also added an inline fuse between the switch and battery.
And as a tip for anybody that's like me and doesn't want to pay $12 for a plastic rocker switch bracket, I bought one of these Simpson Strong Tie brackets for 60 cents and drilled a half inch hole in one leg. It works perfect to mount the switch in the battery compartment. I didn't take any pictures of the switch but the light install is below.

where did you get and what inline fuse did you use? mine did not come with one. Although it did come with these two white triangle chunks in the wiring, which I am a little confused about?

in this picture they are the two black triangular things?

and Immediately after I posted that, I realized I am most likely an idiot and I am sure those are just to make sure the wire doesn't fall too far out of the drain hole????

EmeryZ28 said:

and Immediately after I posted that, I realized I am most likely an idiot and I am sure those are just to make sure the wire doesn't fall too far out of the drain hole????

Click to expand...

I'm not sure, maybe those are your controllers? You said you have a remote, so maybe those receive the signal. I just bought something like this inline blade fuse holder from autozone.
With the RGB I had to buy a separate controller so I just had raw wires on the end of my light. Not sure about those other pieces.

EmeryZ28 said:

where did you get and what inline fuse did you use? mine did not come with one. Although it did come with these two white triangle chunks in the wiring, which I am a little confused about?

in this picture they are the two black triangular things?

Click to expand...

The black "ice cube" looking thingys are the LED controller / driver.

JTC1016 said:

I'm not sure, maybe those are your controllers? You said you have a remote, so maybe those receive the signal. I just bought something like this inline blade fuse holder from autozone.

With the RGB I had to buy a separate controller so I just had raw wires on the end of my light. Not sure about those other pieces.

Click to expand...

I used a similar fused link on my install as well.

well this was helpful! has loads of how to videos for the diablo royal products

http://www.uwanthelp.com/regular-2-wire--one-color--remote-control.html