• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Did I screw up?

Austin1

Active Member
Messages
21
Reaction score
4
Points
42
Boat Make
Yamaha
Year
2009
Boat Model
SX
Boat Length
21
So I read on this site somewhere that you can wet sand out a scratch with 2000 grit sandpaper. So I tried it on my boat and I am left with this dull spot. Did I just mess up the gel coat on my boat? How do I fix this?
 

Attachments

Cobra Jet Steering LLC

Jetboaters Admiral
Vendor
Messages
5,844
Reaction score
5,330
Points
452
Location
Florida
Boat Make
Yamaha
Year
2021
Boat Model
Other
Boat Length
Other
/
 
Last edited:

Cobra Jet Steering LLC

Jetboaters Admiral
Vendor
Messages
5,844
Reaction score
5,330
Points
452
Location
Florida
Boat Make
Yamaha
Year
2021
Boat Model
Other
Boat Length
Other
Damn I thought he wrote 400 my bad I will delete the answer I wondered why he used 400 I was cringing . eyes get bad at night sometimes I have to put on 2 pair of glasses one over the other at a time to read the screen.
 

Joatmon

Jet Boat Addict
Messages
176
Reaction score
100
Points
122
Location
Estero, FL
Boat Make
Scarab
Year
2017
Boat Model
255 SE
Boat Length
25
So I read on this site somewhere that you can wet sand out a scratch with 2000 grit sandpaper. So I tried it on my boat and I am left with this dull spot. Did I just mess up the gel coat on my boat? How do I fix this?
You will need to use 3500 or 4000 grit wet sandpaper with water to get out the dull finish. The gel coat is thicker than car clear coat, but too deep and you will see fiberglass strands. After the 4000 grit use polishing compound. Not rubbing compound. Check out Meguiar's Marine care products on their web site. It has a product guide for marine and RV care. It will cost you more but their stuff is the best.
 

Jgorm

Jetboaters Captain
Messages
1,286
Reaction score
907
Points
207
Location
San Diego / Colorado river
Boat Make
Yamaha
Year
2004
Boat Model
AR
Boat Length
23
You will need to use 3500 or 4000 grit wet sandpaper with water to get out the dull finish. The gel coat is thicker than car clear coat, but too deep and you will see fiberglass strands. After the 4000 grit use polishing compound. Not rubbing compound. Check out Meguiar's Marine care products on their web site. It has a product guide for marine and RV care. It will cost you more but their stuff is the best.
I'd go straight to compound. Over 2000 grit paper is pointless in my experience. It clogs in seconds. 3m makes great Marine compound too. I'm on there fence between meguiars and 3m. Both make quality products and i routinely use both.
 

Zonie

Jet Boat Junkie
Messages
220
Reaction score
174
Points
127
Location
Rotterdam Junction, NY
Boat Make
Yamaha
Year
2005
Boat Model
SX
Boat Length
23
No worries. If the scratch is gone with 2000 it just needs a little polish. You can do it by hand but it's a lot easier if you use a power tool. Nothing fancy, the Harbor Freight polishers work great. I use a standard variable speed polisher but some people prefer the DA (Dual Action) versions. Just personal preference. They are on sale frequently and you can usually get one for around $30.

https://www.harborfreight.com/7-in-10-amp-heavy-duty-digital-variable-speed-polisher-62297.html
https://www.harborfreight.com/6-in-57-amp-heavy-duty-dual-action-variable-speed-polisher-62862.html

You'll also need two kinds of pads and two kinds of compounds. Start with a wool pad and some cutting compound, this takes the scratches out.

https://www.harborfreight.com/7-1-2-half-inch-wool-buffing-pad-90451.html
https://www.amazon.com/Meguiars-Mirror-Glaze-Ultra-Cut-Compound/dp/B001O7PNW8/ref=sr_1_2?s=automotive&ie=UTF8&qid=1523416334&sr=1-2&keywords=meguire's+compound&dpID=41T1IGT8PtL&preST=_SY300_QL70_&dpSrc=srch

Once the scratches are gone (it doesn't take very long) switch to a foam pad and a good polish. As #Jgorm and others have mentioned, there are several good brands of product.

https://www.harborfreight.com/8-in-Polishing-Foam-Pad-61531.html
https://www.amazon.com/dp/B002J854UC/ref=sspa_dk_detail_5?psc=1&pd_rd_i=B002J854UC&pd_rd_wg=1XAdE&pd_rd_r=S1DHM5G6HE4FMWFPWHE8&pd_rd_w=JmXEp

Also, whenever you sand, make sure you sand it wet. Keep it wet, dip it in water frequently or hold a hose over it and use a block to sand with. Don't try to sand by holding the paper in your hands.
 

swatski

Jetboaters Fleet Admiral 1*
Messages
12,806
Reaction score
18,566
Points
822
Location
North Caldwell, NJ
Boat Make
Yamaha
Year
2016
Boat Model
AR
Boat Length
24
No worries. If the scratch is gone with 2000 it just needs a little polish. You can do it by hand but it's a lot easier if you use a power tool. Nothing fancy, the Harbor Freight polishers work great. I use a standard variable speed polisher but some people prefer the DA (Dual Action) versions. Just personal preference. They are on sale frequently and you can usually get one for around $30.

https://www.harborfreight.com/7-in-10-amp-heavy-duty-digital-variable-speed-polisher-62297.html
https://www.harborfreight.com/6-in-57-amp-heavy-duty-dual-action-variable-speed-polisher-62862.html

You'll also need two kinds of pads and two kinds of compounds. Start with a wool pad and some cutting compound, this takes the scratches out.

https://www.harborfreight.com/7-1-2-half-inch-wool-buffing-pad-90451.html
https://www.amazon.com/Meguiars-Mirror-Glaze-Ultra-Cut-Compound/dp/B001O7PNW8/ref=sr_1_2?s=automotive&ie=UTF8&qid=1523416334&sr=1-2&keywords=meguire's+compound&dpID=41T1IGT8PtL&preST=_SY300_QL70_&dpSrc=srch

Once the scratches are gone (it doesn't take very long) switch to a foam pad and a good polish. As #Jgorm and others have mentioned, there are several good brands of product.

https://www.harborfreight.com/8-in-Polishing-Foam-Pad-61531.html
https://www.amazon.com/dp/B002J854UC/ref=sspa_dk_detail_5?psc=1&pd_rd_i=B002J854UC&pd_rd_wg=1XAdE&pd_rd_r=S1DHM5G6HE4FMWFPWHE8&pd_rd_w=JmXEp

Also, whenever you sand, make sure you sand it wet. Keep it wet, dip it in water frequently or hold a hose over it and use a block to sand with. Don't try to sand by holding the paper in your hands.
105 rules!

EDIT: and what a great post!

--
 
Last edited:

zipper

Jetboaters Fleet Admiral 1*
Staff member
Administrator
Messages
7,624
Reaction score
20,661
Points
797
Location
Northern Vermont Lake Champlain
Boat Make
Boston Whaler
Year
1995
Boat Model
Other
Boat Length
18
Wet sanded my whole hull last spring to remove gelcoat oxidation after removing the graphics.20170430_102205.jpg When wetsanding, use a overlapping circular motion, not back and forth. Although there are a lot of products out there, I liked the Marine 31 Heavy cut oxidation remover followed by their pollishing compound. Don't worry, the haziness will come out with more work. But the scratch looks like it is thru the gelcoat and may need spectrum .
20170430_102323.jpg 20170430_144923.jpg20171122_075042.jpg
 
Last edited:
Top