• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Resurrecting Beauty

Brandon_SC

Jet Boat Addict
Messages
91
Reaction score
95
Points
107
Location
Belton, SC
Boat Make
Yamaha
Year
2008
Boat Model
SX
Boat Length
23
Long story short... last year my wife and I purchased a neglected SX230. The engines had been mechanically maintained with 200 hrs on them. No issues there! The neglectful part was the upholstery and exterior. The original owners kept it wet slipped from April to October every season, and it appeared to never have been bottom cleaned or waxed. First order of business was to replace the plastic scupper. Then we purchased a full Seadek kit, which we are waiting until the upholstery is completed to install. The oxidized bright blue gelcoat was killing me... $500 worth of spectrum pastes, polishers, compounds, polishes, sander and sanding pads/paper later... she’s looking better!
 

Attachments

Seadeals

Jetboaters Admiral
Messages
1,273
Reaction score
1,498
Points
262
Location
Greenville, South Carolina
Boat Make
Yamaha
Year
2006
Boat Model
SX
Boat Length
21
Looking good. Now that took some serious elbow grease!
 

Speedling

Jetboaters Admiral
Messages
5,099
Reaction score
4,288
Points
432
Location
Cedar Lake, IN
Boat Make
Yamaha
Year
2008
Boat Model
SS
Boat Length
21
What would you say really got the oxidization off?
And which one made it shiniest?
I really need to brighten up my boat.
 

Scottintexas

Jetboaters Admiral
Staff member
Messages
5,792
Reaction score
6,355
Points
482
Location
Corinth, TX (DFW)
Boat Make
Yamaha
Year
2007
Boat Model
AR
Boat Length
23
looking good! I need to brighten my boat up also, check out the list of known issues in my signature line,
 

Brandon_SC

Jet Boat Addict
Messages
91
Reaction score
95
Points
107
Location
Belton, SC
Boat Make
Yamaha
Year
2008
Boat Model
SX
Boat Length
23
@Speedling if you have the rough feeling type of oxidation, then wet sanding starting with P600 grit on an orbital sander is a good start to see a difference. Follow up with a P800 wet sand, then a heavy cutting compound with a wool compounding pad on a polisher. Then apply polish using a polishing pad on a polisher. The compounding and the polishing by themselves both really make the gelcoat shine. I used 3M’s products on this project.

*if you do decide to sand, just be careful at the nose/bow of the boat. It’s best to hand sand there because the gelcoat is a lot thinner at that area.
 

sethman919

Jetboaters Lieutenant
Messages
433
Reaction score
347
Points
157
Location
Apex, NC
Boat Make
Yamaha
Year
2008
Boat Model
AR
Boat Length
23
Looking good!. glad i didnt have to do that much work to mine.
 

Brandon_SC

Jet Boat Addict
Messages
91
Reaction score
95
Points
107
Location
Belton, SC
Boat Make
Yamaha
Year
2008
Boat Model
SX
Boat Length
23
I did try compounding first before sanding. With oxidation that was this bad, I ended up starting at P220, then a P360 Abralon pad, P600 sandpaper, then P800 sanding mesh. All were done using an orbital sander.
 

Speedling

Jetboaters Admiral
Messages
5,099
Reaction score
4,288
Points
432
Location
Cedar Lake, IN
Boat Make
Yamaha
Year
2008
Boat Model
SS
Boat Length
21
https://www.portercable.com/product-repository/products-portercable/2018/01/26/20/53/382
got this in the garage. You saying you sanded with that thing?! I would think it would destroy the hull asap and create flat spots!
Perhaps some sort of buffing attachment?
My boat has more of that white film stuff going on and I am hoping it gets back up to a good shine if I can get rid of it.
So since you guys are experts... where do you suggest starting?
Also, wouldn't anything abrasive screw up the graphics?
Or is that why you eliminated them?
 

Speedling

Jetboaters Admiral
Messages
5,099
Reaction score
4,288
Points
432
Location
Cedar Lake, IN
Boat Make
Yamaha
Year
2008
Boat Model
SS
Boat Length
21

Speedling

Jetboaters Admiral
Messages
5,099
Reaction score
4,288
Points
432
Location
Cedar Lake, IN
Boat Make
Yamaha
Year
2008
Boat Model
SS
Boat Length
21
From what I'm reading, the orbital has way too fast of a speed. Still researching. Harbor Freight sometimes has one cheap that may or may not last the length of polishing my boat.
 

Brandon_SC

Jet Boat Addict
Messages
91
Reaction score
95
Points
107
Location
Belton, SC
Boat Make
Yamaha
Year
2008
Boat Model
SX
Boat Length
23
Even hand sanding without a sanding block can create waves in the gelcoat. I used a dewalt orbital sander, and it worked fine as long as the proper grits were being used and water was being applied while sanding. Many areas of the boat have to be hand sanded due to curvature. I hated the old graphics, so they were going away from the beginning.
 

Attachments

zipper

Jetboaters Fleet Admiral 1*
Staff member
Administrator
Messages
7,629
Reaction score
20,667
Points
797
Location
Northern Vermont Lake Champlain
Boat Make
Boston Whaler
Year
1995
Boat Model
Other
Boat Length
18
https://www.best-auto-detailing-tips.com/boat-buffer.html
Found this, kinda cool and good info, but still... I own the porter cable orbital.
I used these products and bought the orbital. A rotary with a wool pad will cut the oxidation quicker. I hand wetsanded with 1000 and then 2000 3m paper. If I were to do it again I might try 800 lightly to knock off the oxidation and then the higher #s to follow. The graphics will be in the way of a good job. Mine were beat up anyway. Mine was oxidized, but not as badly as @Brandon_SC , blue hull.20170415_144558.jpg20170430_144923.jpg
 

Jgorm

Jetboaters Captain
Messages
1,286
Reaction score
907
Points
207
Location
San Diego / Colorado river
Boat Make
Yamaha
Year
2004
Boat Model
AR
Boat Length
23
Subscribed. Looks good! I'll be attempting something similar in my 04. 20180422_202716.jpg
What grit would you guys recommend starting with?
 

zipper

Jetboaters Fleet Admiral 1*
Staff member
Administrator
Messages
7,629
Reaction score
20,667
Points
797
Location
Northern Vermont Lake Champlain
Boat Make
Boston Whaler
Year
1995
Boat Model
Other
Boat Length
18
Subscribed. Looks good! I'll be attempting something similar in my 04. View attachment 72857
What grit would you guys recommend starting with?
Try a small section first, say 2 ft. sq. with 800 wet using only circular motion by hand. Then use 1000 and 2000, heavy cut oxidation remover, polishing compound then wax. If you are using a sander, I would try the 1000 grit first. This is just one opinion. Others have had great success using other products and techniques.
 
Last edited:

swatski

Jetboaters Fleet Admiral 1*
Messages
12,806
Reaction score
18,566
Points
822
Location
North Caldwell, NJ
Boat Make
Yamaha
Year
2016
Boat Model
AR
Boat Length
24
Long story short... last year my wife and I purchased a neglected SX230. The engines had been mechanically maintained with 200 hrs on them. No issues there! The neglectful part was the upholstery and exterior. The original owners kept it wet slipped from April to October every season, and it appeared to never have been bottom cleaned or waxed. First order of business was to replace the plastic scupper. Then we purchased a full Seadek kit, which we are waiting until the upholstery is completed to install. The oxidized bright blue gelcoat was killing me... $500 worth of spectrum pastes, polishers, compounds, polishes, sander and sanding pads/paper later... she’s looking better!
Man, I love this. What a great project and the results!

--
 

zipper

Jetboaters Fleet Admiral 1*
Staff member
Administrator
Messages
7,629
Reaction score
20,667
Points
797
Location
Northern Vermont Lake Champlain
Boat Make
Boston Whaler
Year
1995
Boat Model
Other
Boat Length
18

Brandon_SC

Jet Boat Addict
Messages
91
Reaction score
95
Points
107
Location
Belton, SC
Boat Make
Yamaha
Year
2008
Boat Model
SX
Boat Length
23
Today I installed the full Seadek kit from @JetBoatPilot
Mocha over black brushed faux teak. Very happy with it... looking forward to getting it wet tomorrow!
Next projects are upholstery & Simrad install.
 

Attachments

JetBoatPilot

Event Sponsor
Event Sponsor
Vendor
Messages
3,125
Reaction score
3,385
Points
347
Location
Panama City, Fl
Boat Make
Yamaha
Year
2016
Boat Model
Other
Boat Length
19
Looks good!!
 
Top