• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

    So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!

    You only have until September 30th to get in on this.....So Hurry!

    You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

Transom stereo dial replacement

RNYCLV

RNYCLV

Event Sponsor
Event Sponsor
Messages
483
Reaction score
1,166
Points
207
Location
Pen Argyl, Pa/ Ticonderoga, NY
Boat Make
Yamaha
Year
2018
Boat Model
AR
Boat Length
24
So over the summer at some point the dial that controls volume and settings either fell off or got swiped at some point. I have checked Partzilla, and some other OEM parts suppliers but cant find just the knob. I have sent two emails to the manufacture and have yet to get a reply. Anyone have an idea where I can find a replacement. I have been using needle nose plyers I had on board but it would be nice to have it correct again.
 
I lost mine about a year and a half ago and scored a replacement on eBay. I can see it in my order history but when I click on it I get redirected to knobs for other radios. I don’t think it’s available anymore from that seller.
 
Cleveland Steamer said:
I lost mine about a year and a half ago and scored a replacement on eBay. I can see it in my order history but when I click on it I get redirected to knobs for other radios. I don’t think it’s available anymore from that seller.
Click to expand...
Do you know what you searched under?
or how you searched to find it?
 
If it helps I can pull my knob off and measure it. Best I can do is use a tape measure and photo it.
When I search for the know I keep getting related products like the below. Most seem to be 32mm to 33mm so maybe that’s the size of the original knob? Maybe by measuring it will confirm it.

Amazon.com

a.co
 
Cleveland Steamer said:
If it helps I can pull my knob off and measure it. Best I can do is use a tape measure and photo it.
When I search for the know I keep getting related products like the below. Most seem to be 32mm to 33mm so maybe that’s the size of the original knob? Maybe by measuring it will confirm it.

Amazon.com

a.co
Click to expand...
That would be awesome
 
Cleveland Steamer said:
If it helps I can pull my knob off and measure it. Best I can do is use a tape measure and photo it.
When I search for the know I keep getting related products like the below. Most seem to be 32mm to 33mm so maybe that’s the size of the original knob? Maybe by measuring it will confirm it.

Amazon.com

a.co
Click to expand...
I hate to ask, however were you able to get a measurement or that image?
 
Did you ever find the replacement?
 
Big_O said:
Did you ever find the replacement?
Click to expand...
No sadly I have not, I even talked with the dealership... OEM replacements are not the same. apparently for two years they used one size and then went to a bigger one because of this issue. I am going to get one that has a set screw and hope that it holds
That is unless you have one ....lol
 
Whelp. Guess it is time to buy a new boat...

:)
 
? I’m actually having a metal plate made to cover the hole and mount a replacement remote PRC100 to replace the PA4A remote in that same spot.
 
Big_O said:
? I’m actually having a metal plate made to cover the hole and mount a replacement remote PRC100 to replace the PA4A remote in that same spot.
Click to expand...
Im going to have to figure something out, that seems like a good idea
 
I kept my eye out for a whole new PA4 and bought that on eBay a while back. Now when mine falls off I'm ready.
 
S
Julian said:
I kept my eye out for a whole new PA4 and bought that on eBay a while back. Now when mine falls off I'm ready.
Click to expand...
Smart man, I will have to start watching ebay for a whole new one just in cade anything else fails. I did buy one with a retention screw hoping that works.
 
Big_O said:
? I’m actually having a metal plate made to cover the hole and mount a replacement remote PRC100 to replace the PA4A remote in that same spot.
Click to expand...

Just got it today! Should be direct replacement to the PA4 remote. I’ll post some photos when installed.

jewlscustoms.com

Head Unit Replacement Faceplate

This is replacement faceplate for many Yamaha's with the OE Polk PA450. The main dimensions are 3.5" x 5.5" with a 2" cutout in the center. This is to remove the Polk PA450 Commander that is in the transom, and replace it with a metal plate that can cover that large hole, with thru holes to...
jewlscustoms.com jewlscustoms.com
 
Last edited:
You must log in or register to reply here.

Similar threads

TimW451
OEM GPS Module
    • Useful
    • Informative
Replies
7
Views
1K
Philippe
P
The Canuck
Hoppe Hour - Stereo Upgrade
Replies
18
Views
1K
The Canuck
The Canuck
Y
Need Advice - Stereo & Bluetooth Restore to Factory
Replies
13
Views
876
Yoda715
Y
WiskyDan
"Stereo comm error" after audio upgrade
Replies
3
Views
929
Humbeglez
Humbeglez
cyclops
How I Wired My Custom WetSounds Stereo: 2015 242 Limited S
    • Like
Replies
3
Views
1K
cyclops
cyclops
Back
Top