• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Search results

  1. Adrian @ JB Solutions

    Music Input for RGB Controller

    14 pin is input. Input wires are standard wiring colors so pretty simple. Use a military splice and you’ll be golden. Middle is speaker output right is subwoofer output.
  2. Adrian @ JB Solutions

    Music Input for RGB Controller

    You will need a 3.5 to RCA like this https://a.co/d/emVHa60. Our harness isn’t really designed with this in mind but would work in this application. Yamaha 2018-2025 222/242/252/255 Amplifier Integration Harness This would be the easiest solution. Alternatively you could use the Amazon cable...
  3. Adrian @ JB Solutions

    New Stereo Question

    We also now offer OEM quality harnesses. https://jetboatsolutions.com/products/oem-wet-sounds-amplifier-signal-harness
  4. Adrian @ JB Solutions

    Help adding additional amp and tower speakers to a 252SD?

    Yup! We offer a t-harness that provides RCA outputs to each zone, as well as a remote turn on wire. https://jetboatsolutions.com/products/oem-wet-sounds-amplifier-signal-harness You can use the covered hole but some tower speakers come with a 1/4” rubber grommet which is a beater solution...
  5. Adrian @ JB Solutions

    Introducing JB Solutions

    Hello everyone, our website is now live and ordering can take thru there. We are still working to enhance the website and dress it up some more! www.jetboatsolutions.com
  6. Adrian @ JB Solutions

    Help 2024 255XE Wet sounds amp problem

    Do you have access to a multi-meter? I would check for voltage first - this sounds like the issue. If voltage is staying above 12v under load then I would check resistance at each speaker wire.
  7. Adrian @ JB Solutions

    2019 242x SPU25-15 Communication Error

    When you're ready to tackle the project - our transducer harness allows you to install the off-shelf version of the OEM transducer so you can source the part quicker and cheaper.
  8. Adrian @ JB Solutions

    Looking for pinout/ wiring for connext screens

    You will need a CAN decoder to do so, and some pretty good experience working with them.... but it is possible. It is in on our long-term roadmap.
  9. Adrian @ JB Solutions

    Looking for pinout/ wiring for connext screens

    What is the end goal? While a lot of wires are straight forward like audio signal and 12v +/-, the others are mostly data and a mixture of NmEA2000 and J1969. An hour or two with a DMM and you should be able to identify a lot of wires but not necessarily what the data wires do. We have some of...
  10. Adrian @ JB Solutions

    EV discussion - hate or love?

    I’m in the less the better camp. When we went from the M3 to 4XE it was a big change. Went from nothing to a brick. I think key fobs generally should be smaller, the Jeeps are huge.
  11. Adrian @ JB Solutions

    EV discussion - hate or love?

    I get it. I lucked out on my truck. Bought a 2019 that was a lemon and then custom ordered my 2020 after I knew exactly what I wanted. Part of this is probably also taking care of your vehicles. My truck still looks darn close to new inside and out. PPF and Ceramic doing their job well.
  12. Adrian @ JB Solutions

    EV discussion - hate or love?

    Points still made 😂 you didn’t get what you really wanted
  13. Adrian @ JB Solutions

    EV discussion - hate or love?

    Sounds like you messed by not getting a M and you would be still content with it years down the road lol
  14. Adrian @ JB Solutions

    EV discussion - hate or love?

    EVs are deprecating harder than anything we’ve ever seen (my opinion no data to back that up). It’d be foolish to currently buy one. This has been a drastic change from COVID, we traded in our Tesla for what we paid after two years. We were lucky. Alternatively I think I found the sweet spot...
  15. Adrian @ JB Solutions

    EV discussion - hate or love?

    Finding the right deal and leasing is a great option. Walking into a dealer to get a lease deal is a horrible option. I really like leasing right now because my wife trades in so often, and in the off case she wants to keep the car - we just buy it out.
  16. Adrian @ JB Solutions

    Another transducer communication issue....

    Hello, unfortunately we are not vendors for the transducers yet. If you would like to order the harness, please PM me your shipping details and year/make/model of your boat and I will send over a PayPal invoice.
  17. Adrian @ JB Solutions

    Does the Yamaha 252SE have enough power? (upgrading from Chap 203)

    I've never had an issue with towing and hole shots. Biggest issue I have had towing is the rope getting stuck in the jet-wash, I bought a booster ball for that but never got around to using it. I've had probably 400lbs on a single tube and the boat did just fine.
  18. Adrian @ JB Solutions

    Another transducer communication issue....

    Here is a link to our site, which is still a work in progress: https://jetboatsolutions.com/products/yamaha-jet-boat-transducer-t-harness We do not have payments set-up on the site quite yet, but can do a direct invoice if you are interested. Installation is straight forward, unplug old...
  19. Adrian @ JB Solutions

    Another transducer communication issue....

    We have a transducer t-harness that allows you to buy the off the shelf version that is much cheaper (and easier to source) and plug and play into the boat.
  20. Adrian @ JB Solutions

    EV discussion - hate or love?

    I’m starting to see your reasoning, but you’re making some serious assumptions about the public and drivers in general. One-pedal drivers still use the brake pedal, people don’t just forget how to drive. I found going to one-pedal made me drive more cautious and slower because I utilized the...
Back
Top