• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Search results

  1. dlkhmk

    How to clear check engine alarm FSH 210 Sport 2022

    That sounds similar to mine when I had an over temp alarm caused by a clog. I disconnected the batteries for a few minutes and restarted and the alarm went away.
  2. dlkhmk

    210 FSH Live Well

    Do you have the intake valve open?
  3. dlkhmk

    2018 FSH Sport 190

    Did you check your safety lanyard switch? If you're not getting a good connection that could cause the non start, but turning over problem.
  4. dlkhmk

    Replacing Engine and Jet pump Anodes

    Reviving old thread. Anyone have tips for removing an engine anode that is struck? The 12mm bolt comes out fine but the anode seems stuck. Won't turn or pull out. Don't want to do any damage trying to replace it.
  5. dlkhmk

    Bow Pedestal/Chair solution

    The 2016 fsh190 I have came with the bow pedestal chair installed. I've never used it and actually sold the chair. The support is still mounted. If you need pics let me know. I'm sure the setup is different so may not be applicable.
  6. dlkhmk

    2017 FSH190 Sport Bilge Question

    If the switch is on it will cycle every minute or 2 to sense if water is present. It's a very quiet pump and you will only hear a slight buzz for a few seconds. You can pop it loose from the base and turn on the switch you should see the little pump blades turn on for a few seconds if it's...
  7. dlkhmk

    Want To Buy 2016 FSH 190 shipping cover

    I'm looking for a shipping cover for a 2016 FSH 190 if anyone has one to sell. Thanks
  8. dlkhmk

    Shorelandr trailer leaking brake fluid

    The contact I used was, warrantyTN@dexteraxle.com Below pics are what I originally sent to them. Hope it helps. Also, just be aware that I'm now rebuilding the calipers due to completely rusted/frozen pistons and delaminated brake pads. Fun times!
  9. dlkhmk

    Shorelandr trailer leaking brake fluid

    Yes. It was leaking from the master cylinder assembly where the pushrod enters. Looks to me that whoever filled the brake fluid reservoir (factory or dealer) over filled and brake fluid ran down and corroded the parts. No other reason since this never comes in contact with the water when the...
  10. dlkhmk

    Idle speed rattle

    Looked at the plastic and all stainless versions. I went with the oem Yamaha for no real reason other then $$$. Figured the original lasted 5 years so this one should live past when I plan on keeping this boat. I would say it probably depends on the water you use the boat on. I'm 75% fresh...
  11. dlkhmk

    Idle speed rattle

    All quiet, no more metal clank rattle at idle. Did have a check engine alarm when I first hit the lake??? Checked everything over and all looks good and is running great. Alarm went away after 10 minutes and a few restarts. Only thing I can think of is when I ran it without the pump attached...
  12. dlkhmk

    Idle speed rattle

    I followed the service manual exactly with using EPNOC, moly on the splines, torque specs, and loctite on threads. The only thing I didn't do was use the gasket sealant. I've had the pump off before and this time all the way to the impeller housing and I saw very little if any evidence of...
  13. dlkhmk

    Idle speed rattle

    I ordered and changed out the wear ring today and the rattle noise is gone. Purrs like a kitten on the hose. I will take it out on the lake tomorrow and do a final report. I used a combination of the following YouTube videos and the service manual to get through the wear ring replacement...
  14. dlkhmk

    Idle speed rattle

    Sounds like the impeller is rubbing your wear ring. I have the same noise and will be replacing my wear ring housing this weekend. I'll update if it fixes the problem.
  15. dlkhmk

    2017 190 FSH Sport Mechanical Issue

    NGK - LFR6A 6668
  16. dlkhmk

    Adding a Middle Cleat?

    Yes. I added one and use it every time I launch the boat. It's way better when controlling the boat to get a mid line location to pull. Also use it at a local dock that is short and the dock cleats are too close together.
  17. dlkhmk

    what are folks using for spay on lube

    CRC 656. Pump, engine bay, and trailer. 4 years salt and fresh. Still looks brand new!
  18. dlkhmk

    Another FSH 190 leak found and fixed!

    I've had the boat uncovered a lot in the last week with a plenty of rain and washing. I noticed a small amount of water collecting in the black plastic tray that holds the ECU and fuse box. I pulled the unused anchor light pole socket and found ZERO sealant from the factory. Come on...
  19. dlkhmk

    VHF Radio and Antenna Placement

    No pic right now but the antenna is a Pacific Arial 3' whip mounted on the right front corner of the console.
  20. dlkhmk

    210 STEERING WHEEL ON 190

    Not sure but you can add a knob pretty easy if that's what you're looking to do. Its a great addition. Makes steering at slow speed alot better.
Top