• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Search results

  1. Pullen724

    Transducer problem

    FYI - I got my new transducer installed so Im back up and working again. My faulty transducer did not cause the alarm to sound on my boat. The temp gauge was still working, the depth just flashed zero all the time but no alarm. I’m happy to ship you the one I removed pretty cheap if you just...
  2. Pullen724

    New transducer

    Update - upon launching boat, depth finder started working right away.
  3. Pullen724

    New transducer

    Not too bad… I removed the clean out tray for easier access and then removed the hose leading to top of water box. I just loosened the clamp on the motor side if the water box to slightly move it over then could see the transducer directly below. Total probably about an hour including reassembly.
  4. Pullen724

    New transducer

    Thank you… I was hoping that is the case. I won’t be able to get it to the water until next week so this is helpful to know. Will update though
  5. Pullen724

    New transducer

    I just replaced the transducer in my ‘16 242 Limited S because it wasn’t reading depth (water temp still worked and no alarms). Replaced with the Yamaha specific model and haven’t had a chance to launch the boat yet - however the depth is still flashing 0 when boat is on trailer. Does the...
  6. Pullen724

    Transducer problem

    I don’t know how to permanently silence it but I ordered my replacement through a yamaha dealer September 2021 and just received it this week so almost a year is what it took to get it so maybe you will get yours before next boating season at least. Sorry I can’t help on the alarm, just offering...
  7. Pullen724

    Transducer

    Im still waiting on mine that I ordered in September 2021. ETA has changed 3 times already.
  8. Pullen724

    Transducer

    I ordered my transducer on 9/14/21 and just got an update today indicating a “confirmed ship date” of mid December 2021…. Thats better than the July 2022 estimate Yamaha gave when I ordered it a few weeks ago. We shall see…
  9. Pullen724

    OEM Depth gauge flashing “zero”

    Nobody?
  10. Pullen724

    OEM Depth gauge flashing “zero”

    Ive searched the forum and only answer I can find is replace the expensive transducer. Is there not a simple fix or maybe a bad fuse for the depth gauge? Been flashing “0.0” the past four outings on the boat. The transducer surface on the bottom of hull is clean. If must replace transducer...
  11. Pullen724

    Boat Stuff GPS Antenna Cover Replacement - White No Logo

    Before and after install pics. My OEM cover was not broken but had faded into a yellow color that did not look appealing to me. Install is quick and easy.
  12. Pullen724

    Crooked on Trailer?

    Im assuming you already checked the bunks on the trailer to make sure they are resting on same place of the boat on each side and ensure one of the bunks is not resting on one of the ridges of the boat? Is the boat crooked on the trailer or is the entire trailer sagging on that side possibly...
  13. Pullen724

    Boat Stuff GPS Antenna Cover Replacement - White No Logo

    Just placed an order for one of these. Thanks!
  14. Pullen724

    2017 242 lse losing traction (cavitation)

    You may try posting this in the general discussion thread... more folks will see it. Problem could be generic to the jet pumps and maybe not specific to your particular model. Good luck
  15. Pullen724

    NEW Thrust Vector Test Footage

    Thrust vectors if can only do one now... unless you spend more time reversing into tight areas. I have both and its a great setup together.
  16. Pullen724

    Help with choosing a battery

    If Im understanding the “group/series” correctly, it never hurts to go with a bigger series, just costs more, right?
  17. Pullen724

    Help with choosing a battery

    Where did you buy the TPPL? Do you have a link to the exact ones?
  18. Pullen724

    Sotally Tober 5's Completed Build (Pic Heavy)

    Im also curious on the pros & cons of the articulating keel removal. What mounts did you use for the shore spikes? Great looking boat!
  19. Pullen724

    SOLD SOLD Cobra Jet Steering (Magnum AK), Conroe, Tx

    Yes
  20. Pullen724

    SOLD SOLD Cobra Jet Steering (Magnum AK), Conroe, Tx

    Set of Cobra jet steering fins with fangs and steering tie rod. Set is in perfect shape, no issues. All hardware included. This is the Magnum AK series for the articulating keel models. Came off a Yamaha 242 limited S. $250 for all shipped to U.S. sold
Top