• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Search results

  1. JerryG

    SX192 Overtemp Alarm

    The red one goes to the fresh water flush. The black single line is coming from the jet pump then T's to the motor and IC (before i ran a dedicated line) I actually had two kinks but I just zoomed in on the pic and you can only see the red one (oops) And yes this is accessible if you remove the...
  2. JerryG

    SX192 Overtemp Alarm

    I know this is an old thread but still thought I would post to help future jetboaters. I had a similar issue when I first bought my boat. Overtemp would come and go. Never would do it when I returned it to the dealer. Below is what I ended up finding when installing my IC. The way the hoses...
  3. JerryG

    Has anyone come up with a way to prevent stepping on the rear seat?

    I hated stepping on rear seat as well! Been holding up for the past year. For those contemplating whether or not to buy, IMO you can save some $$ by not buying the center cushion. For me, I rarely use it
  4. JerryG

    SX 192 Mods

    @haknslash I went with the Riva replacement filter. Initially i achieved the same mph as you, then I started playing around with the water flow. After I did tbe dedicated water line, I felt maybe too much water was going to the IC (monitoring outlet flow) so I installed a valve so I could adjust...
  5. JerryG

    SX 192 Mods

    50+ (gps) all summer in this lovely hot SC weather with 4 people and gear (2 are kids) prior to the mod i could do around 48 leaving tbe ramp but as soon as the heat soak set it, it would drop to 40mph max. I've also done the ribbon delete and aftermarket air filter so far.
  6. JerryG

    SX 192 Mods

    Wow! Nice to see this thread is still going strong! As everyone is saying, an aftermarket IC makes a huge difference! Just an update on my project. Its been a year and my Fizzle IC is still going strong. Definitely a more expensive route but at the time SVHO ICs were kinda hard to find
  7. JerryG

    SX 192 Mods

    Oh and as you can see, that was with a full tank of gas!
  8. JerryG

    SX 192 Mods

    I can't comment much on the svho but as you have probably read, an ic upgrade definitely helps. Mine has completely eliminated my heat soak issue. Latest test was with 7 on board, 100 temp, 90 water and boat did 48 all day long. Only dropped about 2 or so mph with the extra 3 people. Please post...
  9. JerryG

    Bada Bling and What are your rules?????

    Short and simple. No shoes, no messy food and don't let my boat touch the dock!
  10. JerryG

    AR190-AR192 PICS!

    well the boat is absent from the pic, but still a beautiful picture of the Lake Murray fireworks! !
  11. JerryG

    AR190 Cleats

    Agreed. Some also us a small stone, file or sandpaper to chamfer the holes. Supposedly reduces the likelihood of spider cracks in the gel coat
  12. JerryG

    Just Updated From a 1999 LS2000 to a 2016 SX192

    Yep. Push and let go, then scroll as you normally would. Enjoy!
  13. JerryG

    SX 192 Mods

    Finally installed my "cleanout/flush/winterizing " setup on the fizzle. Gonna play around with the flow this weekend and see if there is any room for improvement!
  14. JerryG

    Post your Yamaha 190, 192 Lighting Upgrade Pics!

    Its a soft glow. I agree, didn't want anything too bright. I will post a few more pics this afternoon.
  15. JerryG

    Water in ski locker

    Possibly drain it and put the plug back in? Mine stays covered and all the "internal" plugs stay in, unless i am cleaning the boat and have never had water in there, even stuck on the lake in a sc down pour. Plug in and see what ya get.
  16. JerryG

    AR190-AR192 PICS!

    many options available
  17. JerryG

    Post your Yamaha 190, 192 Lighting Upgrade Pics!

    phase 1 complete
  18. JerryG

    SX 192 Mods

    I do see a lot of variability on the rpm side. I don't have any other tachometer than the stock one but today it was about a needle thickness from 8000. Didn't think to switch the display
  19. JerryG

    SX 192 Mods

    My previous best was right at 49 and now that I think about it, my kids were in the bow. This time, no kids and all adults were in the rear. But I think anything near 50 is great! Far cry from the heat soaked 40mph I was getting last summer!
  20. JerryG

    SX 192 Mods

    Air temperature was right at 90 today. So the engine outlet is hotter than the IC outlet, a lot. IC outlet is actually about the same as the lake. I got an adjustable orifice (flow control) coming so I can play around with the flows. Prior to the dedicated water line and strainer, water outlet...
Top