• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Search results

  1. C

    Can I have Bimini open while towing with the tower?

    There should be no problem with the bimini out and using the tower. I do it all the time. The tubes may be another thing. I used to pull tubes on the tower, but started noticing a couple minor cracks in the boat near the mounts of the tower. Since then, I only use the hook on the back. YMMV.
  2. C

    Vibration on right side

    I sucked up a 2" piece of flat wood, and it is between the impeller and liner nearest the intake. It should be an easy fix. Amazing what can be sucked up in the middle of a clean looking lake.
  3. C

    Vibration on right side

    Thanks for the replies and information. I only had time to check the reverse gates on the trailer, and they are in the proper place. My daughter and son-in-law are towing the boat back and I will get it on Sunday and look at all those things mentioned. I am hoping it is something easy to fix. If...
  4. C

    Vibration on right side

    I finally got my boat out after a 3 year layoff from boating. I have a 2008 ar230 ho, and changed the oil, plugs and water / fuel separator filters. Lubed the bearings and drained the old fuel. I also installed Cobra Venom fins.The boat ran great, pulling a tube and wakeboarders. On the second...
  5. C

    2008 Ar230 bilge pump location

    Thanks for the replies. Saved me some time by needlessly taking off the cleanout plug tray.
  6. C

    2008 Ar230 bilge pump location

    Hello, After not using my boat for a couple of years, I am getting it dialed in to get back on the water. I cannot locate the bilge pump. Looking on the schematic, I thought it was in the engine compartment. Didn't see it there, and doesn't make sense to be there. Is it located under the tray...
Top