• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Search results

  1. Jonathan Pisarczyk

    Trax Trailer Dolly

    9 ft. I wish it was 12. Then I wouldn’t have to fold tower down.
  2. Jonathan Pisarczyk

    Trax Trailer Dolly

    It does work great. Batteries and charger are included.
  3. Jonathan Pisarczyk

    Trax Trailer Dolly

    I would have went with the cheaper "Trailer Valet" option. However the Trailer Valet wheels are too small for gravel operation. If we had the entire driveway in concrete or asphalt I could get away with that. It is more money but it does work well.
  4. Jonathan Pisarczyk

    Ecoboost towing question

    Maybe some bad fuel? Try some premium next time.
  5. Jonathan Pisarczyk

    Trax Trailer Dolly

    Hey Guys, I recently tested the Trax trailer power dolly. I was originally have issues starting on gravel. I threw a piece of plywood under the wheels to get it started with some momentum. It works great for parking the boat in tight spots. I needed to get the dolly because sometimes...
  6. Jonathan Pisarczyk

    2015+ AR240 Tower Fix

    @swatski is there an easy way to adjust the washer-cable setup that holds the tower in place when tower is lowered? My starboard side cable doesn't have any tension when tower is lowered. I tried to climb under the seat but had a hard time playing with the nuts and washer. I was able to use a...
  7. Jonathan Pisarczyk

    ***WARNING*** 2015-18 YAMAHA “AR” BOAT OWNERS WITH FORWARD SWEPT WAKEBOARD TOWERS

    Me too. I'm still debating about the drill thru with pin.
  8. Jonathan Pisarczyk

    ***WARNING*** 2015-18 YAMAHA “AR” BOAT OWNERS WITH FORWARD SWEPT WAKEBOARD TOWERS

    I've got a 2015 AR240 and my starboard mount started to make a rattling noise in small chop. I stopped the boat and was able to tighten the screw a little bit. The rattling noise still persisted. After getting the boat on the trailer I crawled under the rear seat and was able to get a quarter...
  9. Jonathan Pisarczyk

    2015 AR240 Bow Light Replacement

    Hello Everyone, Just thought I would post on a bow light issue I had with my 2015 AR240. I hope this can help someone else. I replaced my OEM Bow light with a new LED assembly. The OEM light design is terrible. The bulb can easily slide out of position. I also noticed on the new 2018 model...
  10. Jonathan Pisarczyk

    Top Speed RPM Question

    For 8 people and 3/4 tank of gas that sounds about right. I bet the boat would do over 50MPH if you were by yourself.
  11. Jonathan Pisarczyk

    Top Speed RPM Question

    I disagree. I believe the ribbon removal and filters make a difference. I instantly got another 200 rpm on the same day I did the change. I also believe the boat is more responsive. Take it or leave it. I'm happy with the upgrade.
  12. Jonathan Pisarczyk

    Tilted Element Airmar Blanking Plug?

    Hey Ronnie, That makes sense. I was wondering why they included it. I haven't located or seen the back side of the transducer. I'm assuming you get at it from the swim platform inspection hatch.
  13. Jonathan Pisarczyk

    Tilted Element Airmar Blanking Plug?

    Hello Everyone, I had this plug in the glove box of our new 2015 AR240 when we picked it up. I never worried about what it was until now. I'm getting the the boat ready to winterize. I'm wondering if I need to remove the transducer to drain the water? If there is any water in the transducer...
  14. Jonathan Pisarczyk

    2015 AR240 Max RPM

    Was out yesterday in about 90F & 80+% (high humidity) and was still able to get over 7600 RPM.
  15. Jonathan Pisarczyk

    2015 AR240 Max RPM

    Hey Greg, Sounds good. I don't think you will be disappointed. Let me know how it goes. It took me less than two hours to complete the job.
  16. Jonathan Pisarczyk

    2015 AR240 Max RPM

    Hey Greg, I noticed an instant difference. At least 200 more RPM. I made the changes on the water the same day so I could really see the difference. I never saw 7500 RPM until making the changes. If you want the extra top end power and a little more response I would recommend it. Also if...
  17. Jonathan Pisarczyk

    2015 AR240 Max RPM

    Just to further update on the topic. Over the weekend I was able to get 7600 RPM on the Port and 7500 RPM on the starboard with a full tank of gas and 4 people on the boat. However the air temp was much cooler 68F and only 50% humidity. The next day I could only get 7500RPM on the Port and...
  18. Jonathan Pisarczyk

    My 2015 Yamaha 242 Limited S

    My boat on Lake Huron (Great Lakes). Taken from the DJI Inspire 1.
  19. 2015 AR240 captured from my drone

    2015 AR240 captured from my drone

    A hot day on the beach on Lake Huron. Port Franks, Canada.
  20. Jonathan Pisarczyk

    My 2015 Yamaha 242 Limited S

    Very nice pics! I was curious do you have a separate volume control for your tower speakers? If so how does it integrate with the Polk/Connext system?
Top