- Messages
- 619
- Reaction score
- 633
- Points
- 202
- Location
- Jupiter, FL
- Boat Make
- Other
- Year
- NA
- Boat Model
- Other
- Boat Length
- Other
1
Attachments
Last edited:
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Capsize 7/3/17
- Thread starter ClemsonTiger
- Start date
- Tagged users None
Eric Ballard
Jetboaters Commander
- Messages
- 811
- Reaction score
- 961
- Points
- 187
- Location
- Clayton, NC
- Boat Make
- Yamaha
- Year
- 2016
- Boat Model
- SX
- Boat Length
- 19
I'm not sure I would attache rope from my boat to that boat.
Popcornpost
Active Member
- Messages
- 1
- Reaction score
- 0
- Points
- 40
- Boat Make
- SeaDoo
- Year
- 2003
- Boat Model
- Other
- Boat Length
- Other
Dumb question I'm sure, but how do you take on "broadside" waves? What is broadside? Take waves head on if possible right?
jetboater4life
Jetboaters Captain
- Messages
- 1,645
- Reaction score
- 595
- Points
- 247
- Location
- Rochester, MN 55901
- Boat Make
- Yamaha
- Year
- 2010
- Boat Model
- X
- Boat Length
- 21
My bow is pretty low on my 212x so when I see a big roller coming I take it at an angle to avoid swamping over the bow. I recently had to test this when I had my boat on Lake Superior with some huge waves rolling through the pier underneath the Aerial lift bridge in Duluth, MN.
