1. Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Connext Messages

Discussion in 'Yamaha AR240, SX240, 242 Limited / S / X/ E-Series' started by Hellacool, May 20, 2017.

  1. Hellacool

    Hellacool Well-Known Member

    Messages:
    103
    Ratings:
    +21 / 0
    Boat Make:
    Yamaha
    Year:
    2016
    Boat Model:
    AR
    Boat Length:
    24
    Is there a way to pull the engine messages? Every once in a while ill get a port engine error. Fires right up.and runs fine, just a quick error then it goes away. Would love to know what it is.
     
  2. Michael Rasmussen

    Michael Rasmussen Jet Boat Addict

    Messages:
    677
    Location:
    Rochester, NY
    Ratings:
    +202 / 3
    Boat Make:
    Yamaha
    Year:
    2016
    Boat Model:
    242X E-Series
    Boat Length:
    24
    I read on this forum about a cable and software on ebay that will pull codes, just like you can for cars. I looked into it for about 10 minutes until I read the solution wasn't ready for my boat, not sure about other boats.
     
  3. Julian

    Julian Jetboaters Fleet Admiral Staff Member Administrator

    Messages:
    11,763
    Location:
    Raleigh, NC 27614
    Ratings:
    +8,911 / 126
    Boat Make:
    Yamaha
    Year:
    2016
    Boat Model:
    242X E-Series
    Boat Length:
    24
    All the Yamaha boats have #YDS connections that allow you to pull detailed engine hours, diagnostics and errors. I am not aware of a way to do this via the Connext screen. There are usually sellers on ebay selling the cable and sw (you want version 1.3.3)
     

Share This Page