• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Fender location

sethman919

Jetboaters Lieutenant
Messages
433
Reaction score
347
Points
167
Location
Apex, NC
Boat Make
Yamaha
Year
2008
Boat Model
AR
Boat Length
23
This is my first boat that is in such great condition. Previous boats I didn't care much if they rubbed the dock a little. Where, how many, and what kind of fenders do you guys use to protect from dock rash? This is for an 08 AR230.
 

zipper

Jetboaters Fleet Admiral 1*
Staff member
Administrator
Messages
7,722
Reaction score
20,890
Points
797
Location
Northern Vermont Lake Champlain
Boat Make
Boston Whaler
Year
1995
Boat Model
Other
Boat Length
18
We use Taylor Made, probably got a couple from West Marine. Dont remember size, but here is a pic. We use four, you can only see 3 in pic. the forth is tied to the dock cleat at the stern of the boat, which also acts as a marker so I have reference as to which slip is mine, slips are not numbered, when no other boats are around as I come in, not pictured. The middle one is usually tied to the cleat with the spring lines and not the tower.
20170808_135032_001.jpg
 
Last edited:

Jgorm

Jetboaters Captain
Messages
1,286
Reaction score
907
Points
207
Location
San Diego / Colorado river
Boat Make
Yamaha
Year
2004
Boat Model
AR
Boat Length
23
It's going to depend on the dock height. The super cheap ones get sticky and nasty faster, but it still takes years.
 

marmstufl

Jet Boat Addict
Messages
58
Reaction score
45
Points
97
Location
Tampa Bay, Fl
Boat Make
Yamaha
Year
2019
Boat Model
FSH Sport
Boat Length
21
What kind of pole mount did you use there for the top of your tower?
 

zipper

Jetboaters Fleet Admiral 1*
Staff member
Administrator
Messages
7,722
Reaction score
20,890
Points
797
Location
Northern Vermont Lake Champlain
Boat Make
Boston Whaler
Year
1995
Boat Model
Other
Boat Length
18

marmstufl

Jet Boat Addict
Messages
58
Reaction score
45
Points
97
Location
Tampa Bay, Fl
Boat Make
Yamaha
Year
2019
Boat Model
FSH Sport
Boat Length
21
You are the man, thank you! I'm looking for a good combination to fly a larger style flat. I'm using rod holders and rod/flag poles for my current setup. I like yours better because it goes straight up and doesn't come down into the cabin like the rod holders do (attached on the tower).
 
Top