• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

    So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!

    You only have until September 30th to get in on this.....So Hurry!

    You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

Hose clamp replacment

Scott griffith

Jet Boat Addict
Messages
404
Reaction score
167
Points
102
Location
Pensacola fl.
Boat Make
Yamaha
Year
2003
Boat Model
SR
Boat Length
23
Hey guys was wondering if anybody had replaced the old how clamps that rust in the engine compartment . Was think abt doing this
 
And they are good to spray down with your favorite silicone spray (avoiding that debate).
 
It's certainly an item I would tell you to look at closely being in FL, we've had a few member find clamps rusted off

and not just the engine compartment, pull the cleanout hatch cover and look at the clamps on the cleanout tubes and exhaust fitting at the hull
 
Had one break, on my exhaust outlet. Just replaced it. Gonna check/replace any of them that look bad. Maybe keep them sprayed with an anti corrosion spray from now on.
 
Back
Top