• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Priming 2000 Challenger Fuel System

Seadoo4me

Well-Known Member
Messages
26
Reaction score
2
Points
52
Boat Make
SeaDoo
Year
2000
Boat Model
Challenger
Boat Length
Other
Need to prime completely drained fuel system on our 2000 Challenger after replacing sending unit and lines. I have a electric pump I used to empty it but it runs about 6 psi. I'd like to get fuel to the carbs w/o a LOT of cranking. I am also installing primers on both carbs to reduce cranking as well in the future. Would a outboard squeeze type primer or a vaccum pump be safer ?
 
Top