• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Reverse bucket binding on thrust vector when throttle engaged

Pongking35

Member
Messages
1
Reaction score
0
Points
10
Boat Make
Chaparral
Year
2015
Boat Model
VRX
Boat Length
20
So I just installed the Jetboatpilot thrust vectors on my 2015 Vortex 203VRX and when I have the throttle engaged and turn hard right or hard left the reverse bucket gets hung up on the top bolt that hold the upper bracket in place. I talked to the guys at Jetboatpilot and they don’t seem to have an answer. They think the bucket sits too low when the throttle is engaged. I attached a couple picks. Any idea on how to raise the bucket or am I shit out of luck in this one?17875FC3-7EA6-4087-987B-49CFCC199041.jpeg571A923C-209C-433E-A1D0-AD38AF9B4D64.jpeg07FC12A7-60A2-45A8-B2B3-F8D221F98F25.jpeg
 
Top