• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

    So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!

    You only have until September 30th to get in on this.....So Hurry!

    You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

TESTING DAY For SURF SET UP - WAKESHAPER

lashburn1

Jetboaters Lieutenant
Messages
498
Reaction score
377
Points
162
Location
Oceanside, Ca.
Boat Make
MasterCraft
Year
2015
Boat Model
Other
Boat Length
21
Decided to Work on Ballast and Lead placement Wednesday, as no-one was avail to WAKE SURF :(

I took advice for a few Experienced X2 owners here along with that of the WakeShaper guy
I like to Ride above 11 Mph and closer to 12+...
So I had to adjust so ideas to get closer to my desired wake...
We do NOT Like any Bags on Deck in Our boat so my Choices are what can I hide with out taking the Cooler Out...

Tried about 8 different Set ups with Ballast and Wake Shaper
Final set up was-
PORT SURF
12MPH
WakeShaper Deployed 100%
FuLL Hard tanks
450 Starboard Locker Sac
650 Port Locker Sac
200 lbs Bow Sac est,, (in 600lb bag)
100 lb Lead under Starboard Bench
50 Lead Way Back in Port Locker
150 Lead under Port Corner seat
50lb lead under Starboard corner seat
150lb Lead under Observer seat



Quick Video Clip or 2

Wave at 12 MPH

Wake with Boogie Board and Measuring Tape ..
Boogie Board is 18' from Transom


ALL VIDEO and PICS SHOT FROM SUNPAD HEIGHT OR HIGHER ...not CAMERA ANGLE TRICKERY to make anything look Bigger...
But if you have seen enough Footage, you can translate.

PHOTO - No Ballast
IMG_9550.JPG

PHOTO 2 Ballast to Port SURF
IMG_9553.JPG

PHOTO 3 Ballast and WAKESHAPER INSTALLED delpayed to 1st CLICK 11 MPH
IMG_9558.JPG

PHOTO 4 WakeSHAPer Deployed 50 % + PORT Ballast 11MPH
IMG_9562.JPG

PHOTO 5
FINAL Wake
WakeShaper 100%
Full Port and Starboard Ballast, small list to Port

IMG_9575.JPG

PHOTO 6
same set up as Photo 5
Adult size Boogie Board tied 18' of Transom as a Physical Referance
IMG_9579.JPG
 
No surfers ?????? I need to move closer to you, that looks really good,
 
It WAS a wednesday...My kids in School...wife was also volunteering at the kids School...
Employees wanted nothing to do with Me after a long 2 week stretch at work...LOL
Friend all have real jobs...

On the other hand I got to Work on My Single handed Launch Ramp Chops....
 
NOTE: I tried out my New Ramp N Clamp Trailer Latch..
You Drive the Boat on to the Trailer and it Catches the Bow Hook and Locks...
Very nice for a Single handle Launch and Retrieval...
 
lashburn1, Are you looking to adopt? Nice wave.
 
Back
Top