• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Where to buy a bunk board

2nazt

Jetboaters Captain
Messages
1,589
Reaction score
1,361
Points
217
Location
Port St. Lucie, FL
Boat Make
Tidewater
Year
2010
Boat Model
Other
Boat Length
23
So after my recent trip to West End, I found someone decided to run into my trailer bunk and break it about 3'-4' back. They also hit my fender and bent it so much that it damaged my tire enough to cause it to blow about a 1 mile down the road. Thats when I noticed the fender damage though. I have a Karavan trailer, and the bunk boards measures 3" x 9" x 12'. Home Depot doesn't carry that size so I doubt Lowe's would. Any idea where to look for that size timber. I was going to call some lumber yards on Monday as most are closed on weekends, but curious if anyone on here knows some places to check by chance. I'm in Port St. Lucie, FL if that helps anyone. Thanks in advance.
 

KXCam22

Jetboaters Admiral
Messages
1,084
Reaction score
907
Points
257
Location
Kamloops BC
Boat Make
Yamaha
Year
2008
Boat Model
AR
Boat Length
23
Thats an odd lumber size. You may have to laminate one out of 3/4 plywood or 2x12s. My stock mfi boards were laminated from 3/4 plywood. Cam.
 
Top