dustinjean
Jet Boat Addict
- Messages
- 179
- Reaction score
- 123
- Points
- 122
- Location
- Mt. Washington, KY
- Boat Make
- Axis
- Year
- 2014
- Boat Model
- Wake
- Boat Length
- 24
As most people I have seen the indo board but im not willing to spend $150+ for a piece of wood and a roller. I had some 3/4 plywood scraps in my way and got to measuring and cutting, then for a quick roller i filled up an empty 2 liter with water slowly to keep out as many bubbles as possible but i will go buy some 4" or 6" pvc when i have the time to make the trip to lowes for a more solid roller.
I started with a 39x12 board but quickly made one 30x12 which i prefer over the 39" one then screwed some stops on each end of the board so it can not roll over the end and put you on your backside. I still need to take a router to them and put some stain on or paint etc. but they are fun and not much money, so far I have had everything used here.
My wife got some videos yesterday so i will see if i can get them up eventually
I started with a 39x12 board but quickly made one 30x12 which i prefer over the 39" one then screwed some stops on each end of the board so it can not roll over the end and put you on your backside. I still need to take a router to them and put some stain on or paint etc. but they are fun and not much money, so far I have had everything used here.
My wife got some videos yesterday so i will see if i can get them up eventually
