markp
Jet Boat Addict
- Messages
- 49
- Reaction score
- 12
- Points
- 87
- Location
- 48044 Macaomb Michigan Lake St Clair
- Boat Make
- Yamaha
- Year
- 2018
- Boat Model
- SX
- Boat Length
- 19
anyone have 2018 sx195 service manual?
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
I am a bit a newbee, I purchased radiator hose clamp in case i have to be towed but i can seem to figure out where/which hose i would have to clamp before being towed at faster that wake speed and info would be great?i have the book ( 2018 AR195/SX195/AR190/SX190 ) , which page/part you looking for ?
Where to put the valves to me is a personal preference, in the engine compartment or under the clean out tray are both good choices, it comes down to what is best for you both on installation and use.
For valves to be useful for both flushing and emergencies they must be installed between the jet intake and the wye fitting (see picture, left/aft of wye). For valves or clamps to be useful for only emergencies they must installed/used between the jet intake and the tee fitting for the oil cooler which is about 3" forward of the wye.
Here is a link to the video in the thread that @Scottintexas provided about, this is a great description of the MR-1 cooling system,. Starting at about the 3 minute mark there is an explanation of how the engine could flood while being towed or operating on a single engine.
Unfortunately I don't have any pictures of my valve installation and my boat is still in hibernation. Once I take my boat out of hibernation then I will try to get some pictures.
View attachment 20657
Link is downHere is link to the 2018 sx195 service manual online free
https://www.yamahapubs.com/ebook/LIT-18616-03-74/LIT-18616-03-74.html#p=1
Can you tell me if there’s directions to adjust the depth meter ? Mine keeps beeping for long periods of time and is set too high . I’ve tried holding both buttons at same time while depth is on screen and it’s not working.i have the book ( 2018 AR195/SX195/AR190/SX190 ) , which page/part you looking for ?