Welcome to Jetboaters.net!

We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!
You only have until September 30th to get in on this.....So Hurry!

You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

General Discussion

Yamaha Wetsounds upgrade issue

Thread starter 275SDNJ
Start date Aug 1, 2023

275SDNJ

Member

Aug 1, 2023

I have the 2022 Yamaha 275SD. I'm currently upgrading the system. It has the stock wetsounds 6 channel amp. I added two sinister WS amps for 4 towers I installed. I'm now using the stock amp to run the 6 - 6.5 stock component speakers. Was able to pig tale to the DSP but now I'm encountering a clipping issue. I know some people have posted a harness they found that will instead plug into the stock amp to jump into an RCA out. Does anyone have any info on these types of plugs?

You must log in or register to reply here.