• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Help Please!!! Brand new '23 165 first time out and can't go over 8mph/4krpm!

Beachbummer

Jetboaters Admiral
Messages
3,967
Reaction score
2,886
Points
332
Location
Houston TX
Boat Make
Yamaha
Year
2008
Boat Model
SX
Boat Length
23
I'm genuinely glad you got it all worked out. Now the remaining task is to use the snot out of it to make up for all the effort and driving you had to do.

We have some good reads on anchor use and docking, needed equipment, etc. To make sure your are well equipped and ready for all possibilities. Best of luck.
 

Joatmon

Jet Boat Junkie
Messages
176
Reaction score
100
Points
132
Location
Estero, FL
Boat Make
Scarab
Year
2017
Boat Model
255 SE
Boat Length
25
Update:

They finally fixed the propulsion issue. Scarab warranty department was spot on. There was sealant missing from the bottom of the transom plate, allowing air in which caused the cavitation. Also worked out the cosmetic issues with the dealer. First outing this past Tuesday was great. Finally, I could get the boat up to about 45 mph with some light chop in the water. Just passed 4 hours so believe it's still in "break-in" mode.

Thanks to everyone for the all the help and advice! I am truly grateful..
I'm curious to know if your dealer is in Fort Myers.
 
Top