Lspeedss
Jetboaters Commander
- Messages
- 1,073
- Reaction score
- 324
- Points
- 192
- Location
- Powhatan,VA. 23139
- Boat Make
- Yamaha
- Year
- 2007
- Boat Model
- AR
- Boat Length
- 23
Someone on this board wrote of using ear plugs...
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
PIlot outlet, "pee hole", problem?
- Thread starter xoomer
- Start date
- Tagged users None
maboat
Jetboaters Captain
- Messages
- 1,070
- Reaction score
- 626
- Points
- 227
- Location
- Lake Ray Hubbard, TX
- Boat Make
- Yamaha
- Year
- 2006
- Boat Model
- AR
- Boat Length
- 23
This is a fairly standard function on most boats with transmissions. It just happens to also work (somewhat) on our boats without transmissions.
If the throttles are in "neutral" and you push the indicated button, then move the throttles it will rev the engines without moving the reverse gate. There is one on each side for each throttle (they are independent of each other)
Steve & Heidi
Jet Boat Addict
- Messages
- 19
- Reaction score
- 29
- Points
- 92
- Location
- Cape Coral
- Boat Make
- Yamaha
- Year
- 2022
- Boat Model
- FSH Sport
- Boat Length
- 25
Maboat - really! I did not know it could do that. I'm excited to give it a try this weekend. Goes to show you learn something new on the forum every visit.
Also, I found that the pee hole line from my port engine was also constricted by an over tightened zip tie from the factory. Longest run as Mel points out and constricted. Double whammy. It was hardly flowing at idle but going pretty good at higher rpm. Replaced the zip tie and both flow the same now.
Also, I found that the pee hole line from my port engine was also constricted by an over tightened zip tie from the factory. Longest run as Mel points out and constricted. Double whammy. It was hardly flowing at idle but going pretty good at higher rpm. Replaced the zip tie and both flow the same now.