GTS 187 impeller and wear ring parts numbers??????

[Kyle Mekulik]

Does anyone know of the part numbers for the impeller and wear ring for a 2015 GTS 187 with the 250hp sucked up something hard and it dinged the impeller..

 

[Samson]

Hey Kyle.

I have the GTS 207 with the supercharged 250 hp. I was on lake other day and lost all propulsion. Had to get towed. Boat runs with a loud whine and if I rev in fwd or reverse I get no movement. On trailer hooked to hose no loud whine. Back on water nothing. None of the seadoo dealerships will touch my boat even thought it’s same motor so I’m stuck making appt with glastron dealer 1 1/2 hours away who is booked up for 3 weeks. I too would like to know a seadoo model I could give to local seadoo dealer to see if they have wear ring in stock. I think that may be my problem. Do i have to buy from dealer one of those impeller removal tools also?

 

[Kyle Mekulik]

I’m working on all the info tomorrow Monday going to contact a reputable marine dealer that sells Glastrons so I can get more info and what MM spline tool I need on top of all the parts numbers

 

[Samson]

I took my jet pump off from the back. My impeller shaft is stripped. Don’t do 360s in reverse. I think that’s how I did it. 70 hours on boat. When I look up parts on eBay the description only says what seadoo jet boat models or what seadoo jet skis the parts are for, not our boats. And I called local seadoo dealer and told them I have Rotax 1503 4tec and they said we can’t look up parts that way, we neee a seadoo model to cross reference. So Frustrating. I even have the 1503 service manual that I bought online. It shows all parts for different repairs but doesn’t give part numbers. lol. I don’t have a Glastron dealer around me. I bought boat used out of state.

 

[Kyle Mekulik]

Ok guys got parts numbers for the 250hp Rotax single engine boat powered by BRP

Wear ring 0460160
Impeller 0460166
This supposedly only applies to 18-21ft boats

 

[Kyle Mekulik]

I was able to get ahold of someone at recboat holdings @ this number make sure you have your hull ID

(231) 775-1351

 

[Kyle Mekulik]

I took my jet pump off from the back. My impeller shaft is stripped. Don’t do 360s in reverse. I think that’s how I did it. 70 hours on boat. When I look up parts on eBay the description only says what seadoo jet boat models or what seadoo jet skis the parts are for, not our boats. And I called local seadoo dealer and told them I have Rotax 1503 4tec and they said we can’t look up parts that way, we neee a seadoo model to cross reference. So Frustrating. I even have the 1503 service manual that I bought online. It shows all parts for different repairs but doesn’t give part numbers. lol. I don’t have a Glastron dealer around me. I bought boat used out of state.

how long did it take you to remove the pump just want to budget my time and what tools anything special

 

[Samson]

Hey Kyle. Thanks for info. Only took 30 minutes. 4 hex screws need to be removed to take nozzle /Venturi loose. They were very tight. I had to go to Home Depot and buy hex wrenches with handles. Then you need 10 mm wrench and socket to get the little nuts off for reverse drive and some other thing I forget what it’s called. Then you need a 17 mm deep socket and a very long extended to get the 4 bolts off for pump all the way back in there. I have appointment with Glastron dealer to get my stripped shafts repalaced under warranty. But they are booked until mid July. There goes my summer

 

[Samson]

Stripped driveshaft

 

[Kyle Mekulik]

Stripped driveshaft

I would buy a new one and do it yourself I couldn’t live without my boat for the season. If you meet the service manual send me your email I’ll send it to you

 

[Jeff85]

Where the hell did you find the wear ring? Can't find it online.

 

[Jeff85]

Hey Kyle.

I have the GTS 207 with the supercharged 250 hp. I was on lake other day and lost all propulsion. Had to get towed. Boat runs with a loud whine and if I rev in fwd or reverse I get no movement. On trailer hooked to hose no loud whine. Back on water nothing. None of the seadoo dealerships will touch my boat even thought it’s same motor so I’m stuck making appt with glastron dealer 1 1/2 hours away who is booked up for 3 weeks. I too would like to know a seadoo model I could give to local seadoo dealer to see if they have wear ring in stock. I think that may be my problem. Do i have to buy from dealer one of those impeller removal tools also?

I used a vice to hold housing, then two rubber coated handles on some tools . Wedge then in the impeller across from each other, and turn . Comes right off .

 

[Jeff85]

Ok guys got parts numbers for the 250hp Rotax single engine boat powered by BRP

Wear ring 0460160
Impeller 0460166
This supposedly only applies to 18-21ft boats

Did you get those parts installed? I ordered new wear ring and it's turned into a total abortion. Wear ring goes in no problem. Impeller not so much. Got it in with a press with out messing the impeller up, and can't get impeller to thread onto bearing shaft . Seriously have no idea what to do, besides throw the old wear ring back on .

 

[Kyle Mekulik]

Man I did everything myself no problem at all... where did you get your wear ring from maybe it wasn’t machined right. The wear ring I got looked to be CNC machined HD was perfect tight fit

 

[Jeff85]

I'm starting to think my prop was fucked and the old wear ring conformed to it. Might cut my losses and just get the solas ring and impeller

 

[Kyle Mekulik]

The wear ring wasn’t solas branded it was IJS
https://www.impellers.com/shop.html#!/IJS-159mm-Sea-Doo-Wear-Ring-RXP-RXT-GTX-Wake-GTR-and-boat-3501/p/73492222

 

[Jeff85]

Thanks!

 

[Kyle Mekulik]

The solas impeller is https://www.impellers.com/shop.html#!/15-20R-SeaDoo-Impeller-for-Modified-Engine-ECU/p/73430621

 

[Jeff85]

You noted you got a 159wear ring .when I called solas, gave them my part number off my stock impeller, he told me it was a 161mm .

 

[Kyle Mekulik]

I bought 159mm and it fit perfect installed it myself. Grab a micrometer from harbor freight and measure yours always nice to be rite the first time