• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Search results

  1. James R Whitten

    sold my 195

    Some action pictures
  2. James R Whitten

    sold my 195

    Well I sold my 195 and bought a baja 342 boss with twin 496's. I got into poker runs so I needed something a little bigger and faster. Plus this boat should work great for bimini next year
  3. James R Whitten

    Code p0340

    So for the late response. But I ordered it from marine max. Cost like a hundred bucks.
  4. James R Whitten

    Reverse module error

    Make sure your battery is good. These boats a very finicky when it comes to electrical systems. Also there's two relays in the fuse panel in the engine compartment that go bad. You could try replacing those as well.
  5. James R Whitten

    Bimini july 3rd-7th 2020

    I I canceled mine as well. Plus I just sold my boat. But I'm on the verge of getting another one. So I'm gonna try again next year. Sucks because this is the third year in a row somethings happened.
  6. James R Whitten

    Bimini july 3rd-7th 2020

    @Hopp Cool bud give this link a read. Kinda gives you an idea of the things you'll need. It's pretty informative. https://jetboaters.net/threads/preparing-for-bimini.3800/
  7. James R Whitten

    Bimini july 3rd-7th 2020

    Well florida is starting to open up beaches. Now need the Bahamas to open back up. Starting to look better.
  8. James R Whitten

    Bimini july 3rd-7th 2020

    I still plan on going. I'm thinking(hoping) this will be over by then. But as of right now I still plan on going.
  9. James R Whitten

    Code p0340

    Oh yeah the sensor is expensive! 100 bucks from brp.
  10. James R Whitten

    Code p0340

    Yeah it was pretty simple. Had to remove the mass air meter and air intake tube to fit my fat hand back there to get to the sensor. But it wasn't hard. Its 1 small bolt and one plug and it comes right out. Took about 20 minutes. I don't recommend dropping the bolt. It's a pain in the ass to...
  11. James R Whitten

    Antifreeze in bilge

    Thanks bud. I'm just trying to head off a small problem before it turns into a major problem. I'm gonna climb under the boat and check the ride plate to make sure I have no obstructions at the heat exchanger. And next go round check for leaks at my hoses. Hopefully it's something simple such as...
  12. James R Whitten

    Antifreeze in bilge

    Those temps aren't too high though? Between 190 and 205?
  13. James R Whitten

    Antifreeze in bilge

    No wasn't changed.
  14. James R Whitten

    Antifreeze in bilge

    Having a problem with finding antifreeze in my bilge. First trip of the season took the boat out. Ran it for a while got back to the boat ramp and pulled plug and about half a quart to a quart came out of the bilge. Assumed it came out of the overflow Had to do some work on the boat and went out...
  15. James R Whitten

    Code p0340

    Replaced the camshaft position sensor. Problem fixed.
  16. James R Whitten

    Bimini july 3rd-7th 2020

    I've been about 35-40 miles in pretty choppy conditions and used a little less than 1/2 a tank.
  17. James R Whitten

    Bimini july 3rd-7th 2020

    Yeah those numbers are with near perfect conditions. I'm taking an extra 10 gallons of gas in cans on the back of the boat. I'm pretty sure that should be enough.
  18. James R Whitten

    Bimini july 3rd-7th 2020

    I don't have the link but I believe it's in the preparing for bimini thread. https://jetboaters.net/threads/preparing-for-bimini.3800/
  19. James R Whitten

    Code p0340

    Just replaced the battery today. The old one was starting to drain last summer. I'm gonna check out that diagram.
  20. James R Whitten

    Code p0340

    Took the boat out today. Boat ran fine. As the day went on was getting harder to start. In the way back to the ramp the check engine light came on. Checked the code and its p0340. Googled it and it says it's the camshaft sensor. Pulled the plug and about half a court of antifreeze came out of...
Back
Top