• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Search results

  1. Beachbummer

    Motor not responding to No Wake Mode Inputs

    No wake requires certain TPS reading before it will engage. Maybe throttle was a little sticky and open more than permitted? If it's all working well now, just keep an eye on it. If you are very curious and have YDS for your boat, you could read the tps voltage and degree position at idle from...
  2. Beachbummer

    syphoning gas ....

    I thought it was a once a year thing or once a lifetime situation. You could plumb a T connector and feed from there for a permanent solution, but there's a reason more people don't do it. Dealing with gas in containers is heavy, boring and smelly at best, and it goes down from there. Full...
  3. Beachbummer

    syphoning gas ....

    I don't know for how long it will remain active, but you can disconnect the fuel line from the engine and set the switch to ON. At least some fuel comes out until you cut the power. I realized when removing the throttle assembly to adjust the throttle sensor, then keyed to on to check the...
  4. Beachbummer

    Unpowered Auto Bilge Pump?

    The fuse is only a protection device. Increasing the fuse size won't increase the power of your pump. A larger fuse would allow your pump to draw more power without blowing the fuse, but seeing how it does not blow the current fuse, a larger fuse won't do anything, except slightly reduce the...
  5. Beachbummer

    Unpowered Auto Bilge Pump?

    I recommend theT-800. I purchased the 1200 but their unusual hose size was more expensive than I would have liked. The t-800 can use 3/4 hose which is cheaper and more widely available. Since any water that you don't know where it comes from is concerning, I'm not a huge fan of the vacuum...
  6. Beachbummer

    Unpowered Auto Bilge Pump?

    There's a drain plug with a float ball. So when you get on plane the water drains. It sucks, leaked on 4th use. Waste of $25. Bilge pump is so important but without an alarm, you are still in trouble if it gets overwhelmed. You really want a bilge alarm so you know when it comes on AND if it's...
  7. Beachbummer

    Do we really need our scuppers?

    It's the magic of physics. Water pressure mumbo jumbo water level bla bla, water drains to the lower water level even if the drain is submerged. As long as the water inside the boat is above the level of the water in the lake/ocean the water will flow out of the boat via the scupper.
  8. Beachbummer

    2006 Yamaha SX 230 starting issues with one motor

    I had never heard the injectors could be dissasembled.... Do you mean open as in electrically activated so they allow fluid through? Or opened as in disassembled to explore the internal parts?
  9. Beachbummer

    2006 Yamaha SX 230 starting issues with one motor

    If you don't mind a little fuel, you can open the injectors by feeding them 9-12v... You might find someone local to clean them for you. There are a few you tube videos, folks using carb cleaner spray to clean them. Best of luck!!!
  10. Beachbummer

    Connext Issue

    Crud, someone else recently reported same behavior and the screen ended up needing replacement. So sorry. Hopefully not your case, keep us posted.
  11. Beachbummer

    Connext Issue

    And you are absolutely sure all grounds and all positive cables were hooked up when you reconnected your new batteries?
  12. Beachbummer

    oil leak from front of engine on yamaha 2007 FX cruiser HO

    Yes, that cap Is ornamental, And there's no difference on engine performance that we are aware of.
  13. Beachbummer

    oil leak from front of engine on yamaha 2007 FX cruiser HO

    This is where that cap normally goes.
  14. Beachbummer

    oil leak from front of engine on yamaha 2007 FX cruiser HO

    I think the cap might have come off with time or vibration, the leak is another matter entirely and needs to be researched.
  15. Beachbummer

    oil leak from front of engine on yamaha 2007 FX cruiser HO

    The cap on my experience is ornamental and covers a hole in the engine head. If you only have one, the other might be right on the head still.
  16. Beachbummer

    To keep (and fix) or not to fix our 2003 SR230 Yamaha Jet Boat?

    SBT does offer a warranty, but it's parts only, so the labor costs to replace if it fails are on the buyer. If you can source a better engine by all means do that. Best of luck!
  17. Beachbummer

    In need of superchargers for 2014 215HO

    Marine use Is just so different that auto. Car engine might spend 10 minutes above 5000rpm in it's lifetime... It's more like 100 hours out of 200 hours for These ... Different animals
  18. Beachbummer

    Need some help: Another Reverse Gate question

    The Throw of the cable is controlled by the binnacle, not by the cable... So if the cable reaches the desired spots, it's not the cable that's wrong, but something else on the adjustment.
  19. Beachbummer

    To keep (and fix) or not to fix our 2003 SR230 Yamaha Jet Boat?

    Engine does NOT need to be taken apart for first diagnosis. I would ask if they can rig a compression test of Cylinder 1, and leak down test., if the mechanic was a fraud, he might have lied about no compression. You might need a head only if cylinders and bottom end are good, and just valves...
  20. Beachbummer

    To keep (and fix) or not to fix our 2003 SR230 Yamaha Jet Boat?

    Where are you located? Sometimes it's the head and sometimes it's the block...Any chance it's the head only? "Cylinder shot" can mean a few things. Usually when the injector is stuck on, the issue is the computer, not the injector...and the computer can cost another $1K or so. You will want to...
Back
Top