• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Search results

  1. Beachbummer

    2006 Yamaha SX 230 starting issues with one motor

    If you don't mind a little fuel, you can open the injectors by feeding them 9-12v... You might find someone local to clean them for you. There are a few you tube videos, folks using carb cleaner spray to clean them. Best of luck!!!
  2. Beachbummer

    Connext Issue

    Crud, someone else recently reported same behavior and the screen ended up needing replacement. So sorry. Hopefully not your case, keep us posted.
  3. Beachbummer

    Connext Issue

    And you are absolutely sure all grounds and all positive cables were hooked up when you reconnected your new batteries?
  4. Beachbummer

    oil leak from front of engine on yamaha 2007 FX cruiser HO

    Yes, that cap Is ornamental, And there's no difference on engine performance that we are aware of.
  5. Beachbummer

    oil leak from front of engine on yamaha 2007 FX cruiser HO

    This is where that cap normally goes.
  6. Beachbummer

    oil leak from front of engine on yamaha 2007 FX cruiser HO

    I think the cap might have come off with time or vibration, the leak is another matter entirely and needs to be researched.
  7. Beachbummer

    oil leak from front of engine on yamaha 2007 FX cruiser HO

    The cap on my experience is ornamental and covers a hole in the engine head. If you only have one, the other might be right on the head still.
  8. Beachbummer

    To keep (and fix) or not to fix our 2003 SR230 Yamaha Jet Boat?

    SBT does offer a warranty, but it's parts only, so the labor costs to replace if it fails are on the buyer. If you can source a better engine by all means do that. Best of luck!
  9. Beachbummer

    In need of superchargers for 2014 215HO

    Marine use Is just so different that auto. Car engine might spend 10 minutes above 5000rpm in it's lifetime... It's more like 100 hours out of 200 hours for These ... Different animals
  10. Beachbummer

    Need some help: Another Reverse Gate question

    The Throw of the cable is controlled by the binnacle, not by the cable... So if the cable reaches the desired spots, it's not the cable that's wrong, but something else on the adjustment.
  11. Beachbummer

    To keep (and fix) or not to fix our 2003 SR230 Yamaha Jet Boat?

    Engine does NOT need to be taken apart for first diagnosis. I would ask if they can rig a compression test of Cylinder 1, and leak down test., if the mechanic was a fraud, he might have lied about no compression. You might need a head only if cylinders and bottom end are good, and just valves...
  12. Beachbummer

    To keep (and fix) or not to fix our 2003 SR230 Yamaha Jet Boat?

    Where are you located? Sometimes it's the head and sometimes it's the block...Any chance it's the head only? "Cylinder shot" can mean a few things. Usually when the injector is stuck on, the issue is the computer, not the injector...and the computer can cost another $1K or so. You will want to...
  13. Beachbummer

    Motor issue ar 250

    I would strongly suggest confirming oil level and insulation, perhaps identifying if the noise is from the pump or engine. For your own happiness, I would not take the boat in now unless you identify an issue. Maybe it needs more use, go run it like you stole it :) Best of Luck!
  14. Beachbummer

    Engine wash out

    Right, that's the hose connection to allow you to run the engine for more than a few seconds without overheating it, while the boat is out of the water. In my opinion you can run 15 seconds max without cooling water.
  15. Beachbummer

    Battery installation issue

    There are several wires that go on each battery post... And the connections need to be very tight. Poke your head in there for any cables that you missed connecting, and retighten both negative and positive posts. New also does not always mean perfect. If the above fails you may need to check...
  16. Beachbummer

    Brand new MR1 engine?

    I'm not an expert in the area by any means, but you can search part microfiche and ebay to see what you can find that matches. I found a low hours freshwater engine 3 years ago and it worked out. Best of luck!
  17. Beachbummer

    2004 sx230 radio replacement

    No direct replacement that we know of.
  18. Beachbummer

    2005 SX230 H/O - Crank/No Spark Condition on Both MR-1 Engines

    Weirdly the thermostats still allow some water flow when closed If the housing seals well to the point no water is leaked into the engine bay... I would try to reuse.
  19. Beachbummer

    Brand new MR1 engine?

    Are you looking to do the swap yourself? Or pay someone local to help? I've heard they fit just fine, but the jetski ECU does not have no wake (and has a key ski upside down switch also) so you want to use your ECU. If you are hiring someone local to help, go with their recommendation. They...
  20. Beachbummer

    2005 SX230 H/O - Crank/No Spark Condition on Both MR-1 Engines

    All my overheats have been related to low water pressure on land, and debris in the pump while on the water. Make sure there is no cavitation/debris on the pump, no matter how small, if the pump is not well loaded and pushing water, the cooling water cannot reach the engine. Any overheat more...
Back
Top