• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Search results

  1. Adrian @ JB Solutions

    Yamaha 242XE 2016 Depth Finder Not Working

    Is your water temp working correctly?
  2. Adrian @ JB Solutions

    Yamaha 242XE 2016 Depth Finder Not Working

    How deep of water have you tested it in?
  3. Adrian @ JB Solutions

    Replacement wetsound speaker

    We sell the wire connectors in pairs. https://jetboatsolutions.com/products/oem-wetsounds-speaker-harness
  4. Adrian @ JB Solutions

    255 fsh transducer

    The DT-800 is usually it
  5. Adrian @ JB Solutions

    2025 AR190 speaker upgrade

    @2kwik4u I don’t want to derail his thread but if you can’t get the answer you are looking for send me a PM. I can answer these.
  6. Adrian @ JB Solutions

    2025 AR190 speaker upgrade

    I can't speak for his instance, but I've found this set up is fine for fresh water... not very good with salt, with failures occurring rather quickly.
  7. Adrian @ JB Solutions

    2025 AR190 speaker upgrade

    We always recommended power first. Either way you will eventually need an amplifier and we have people satisfied with just putting an amplifier on the stock speakers. Something like the Clarion XC2410 300 Watt 4-Channel Class-D Marine Amplifier is a great start with little money spent.
  8. Adrian @ JB Solutions

    Help adding additional amp and tower speakers to a 252SD?

    I have the kicker 9” horns, the brackets came with it.
  9. Adrian @ JB Solutions

    Help adding additional amp and tower speakers to a 252SD?

    Yes it works for both 1 and 2. It is a T-Harness so in application 2 you just don’t use the end that would go in the amplifier. You could also cut off the end to sell with your OEM amplifier. We also offer speaker harnesses to make replacing the amp a breeze.
  10. Adrian @ JB Solutions

    Help adding additional amp and tower speakers to a 252SD?

    Wires were hidden as part of the speaker mount design and utilized a grommet that came with it.
  11. Adrian @ JB Solutions

    Help adding additional amp and tower speakers to a 252SD?

    It really depends on the towers. They all have different dimensions and mounting points. On my personal vessel I had to have them mounted below the tower and I placed them so it was very difficult to hit your head on them. Took some time to figure out exact best location.
  12. Adrian @ JB Solutions

    Music Input for RGB Controller

    14 pin is input. Input wires are standard wiring colors so pretty simple. Use a military splice and you’ll be golden. Middle is speaker output right is subwoofer output.
  13. Adrian @ JB Solutions

    Music Input for RGB Controller

    You will need a 3.5 to RCA like this https://a.co/d/emVHa60. Our harness isn’t really designed with this in mind but would work in this application. Yamaha 2018-2025 222/242/252/255 Amplifier Integration Harness This would be the easiest solution. Alternatively you could use the Amazon cable...
  14. Adrian @ JB Solutions

    New Stereo Question

    We also now offer OEM quality harnesses. https://jetboatsolutions.com/products/oem-wet-sounds-amplifier-signal-harness
  15. Adrian @ JB Solutions

    Help adding additional amp and tower speakers to a 252SD?

    Yup! We offer a t-harness that provides RCA outputs to each zone, as well as a remote turn on wire. https://jetboatsolutions.com/products/oem-wet-sounds-amplifier-signal-harness You can use the covered hole but some tower speakers come with a 1/4” rubber grommet which is a beater solution...
  16. Adrian @ JB Solutions

    Introducing JB Solutions

    Hello everyone, our website is now live and ordering can take thru there. We are still working to enhance the website and dress it up some more! www.jetboatsolutions.com
  17. Adrian @ JB Solutions

    Help 2024 255XE Wet sounds amp problem

    Do you have access to a multi-meter? I would check for voltage first - this sounds like the issue. If voltage is staying above 12v under load then I would check resistance at each speaker wire.
  18. Adrian @ JB Solutions

    2019 242x SPU25-15 Communication Error

    When you're ready to tackle the project - our transducer harness allows you to install the off-shelf version of the OEM transducer so you can source the part quicker and cheaper.
  19. Adrian @ JB Solutions

    Looking for pinout/ wiring for connext screens

    You will need a CAN decoder to do so, and some pretty good experience working with them.... but it is possible. It is in on our long-term roadmap.
  20. Adrian @ JB Solutions

    Looking for pinout/ wiring for connext screens

    What is the end goal? While a lot of wires are straight forward like audio signal and 12v +/-, the others are mostly data and a mixture of NmEA2000 and J1969. An hour or two with a DMM and you should be able to identify a lot of wires but not necessarily what the data wires do. We have some of...
Back
Top