• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

165 10 hour check up

Michael Hillman

Jet Boat Lover
Messages
14
Reaction score
6
Points
72
Location
Lake Pleasant AZ
Boat Make
Scarab
Year
2015
Boat Model
Impulse
Boat Length
17
i just had my 10 hours on the 165. I brought it in and they did the service. Before the service the engine would not go past 7000 rpm. I thought that was the break in mode. After the service the boat will still not go past 7000. The dealer said they cleared the service code so not sure why it is not. Anyone have any thoughts
 
i just had my 10 hours on the 165. I brought it in and they did the service. Before the service the engine would not go past 7000 rpm. I thought that was the break in mode. After the service the boat will still not go past 7000. The dealer said they cleared the service code so not sure why it is not. Anyone have any thoughts

After 8hrs you should be getting 7800-8000 rpm at 51-54 mph depending on boat and water/wind conditions.
 
Last edited:
Attached is my Scarab 165 max speed video. Have already had the 1st oil change. Sound is loud so turn is down before watching. Welcome to jetboaters.net and update your location in your profile.
 
Max I can get out of mine is 53, and that's at 8100 rpms
 
Back
Top