195 single axle trailer bearings

[avlryan]

I picked up a Scarb 2019 195 Wake Edition last year. I was prepping the trailer for a long trip and discovered that one of the outer bearings was destroyed. The trailer is the black Scarab single axel version. Does anyone know what parts I need to replace them? It would be great to get a kit with everything.

Thanks!

 

[usmcgoose]

A lot of manufacturer of trailers use universal hubs and bearings. Look at the axle on the trailer. There should be a sticker that has the load rating of the axle. The hub assemblies will match this rating. These can be found at a place such as Northern Tool. The entire hub assembly is not expensive and comes comes pre-greased. The entire replacement job takes less than an hour. Just remember, there is a retaining washer behind the axle nut you'll need to reuse (it also aids in seating the bearings of the hub assembly on the axle.

 

[avlryan]

Thanks for the info. I think I found that it uses 25580 for the inner and 15123 for the outer. I'll check out the hub assemblies as well. That sounds easy enough.

 

[JetBoat195G]

I'd be interested in where you get the bearings, specific part numbers, and as detailed a description as you are willing to provide for replacing the bearings (including pictures). One of my bearings seems to be running hot, and I've contemplated replacing it.

 

[JetBoat195G]

I also found this information that came with my single axle, gatorhyde coated, Scarab 195G trailer, in case it's of any value.