195s wake tower lanyard

[Soreuh]

Hey all!

Been reading for a while and just joined after getting my first jet boat! Lots of good info here and figured I’d post this question to see if someone could help me

When I fold the wake tower down - both the lanyards are loose / not secured at all and I do not want it resting on the side or window.

I found under each side back seat storage a rubber piece as well as one metal washer on the port side.

I’m assuming it’s at least one if not two metal washers I need.

Does anyone have a picture of what the lanyard setup should look like so I can go to the shop and get the required missing pieces ?

Thanks!

 

[steveinmd]

Hey all!

Been reading for a while and just joined after getting my first jet boat! Lots of good info here and figured I’d post this question to see if someone could help me

When I fold the wake tower down - both the lanyards are loose / not secured at all and I do not want it resting on the side or window.

I found under each side back seat storage a rubber piece as well as one metal washer on the port side.

I’m assuming it’s at least one if not two metal washers I need.

Does anyone have a picture of what the lanyard setup should look like so I can go to the shop and get the required missing pieces ?

Thanks!

No pic but I believe there should be the rubber washer, flanked by metal washers and then the jamb nuts

 

[Soreuh]

Perfect thanks! That’s what I thought but wanted to be sure.

Such a tight fit getting hand up there to attach the washers and bolts! Ha