Welcome to Jetboaters.net!

We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

General Discussion

1994 Tracker Pro Jet 18

Thread starter Eastridge98
Start date Mar 26, 2022

Eastridge98

Active Member

Mar 26, 2022

Recently bought the boat, I’ve never had a jet. Let alone an inboard jet. It’s the 3cyl 90hp. I was looking at the rudder and noticed it looked like a notch was cut out of it. I was looking online and couldn’t find any pictures to see if this was normal or not. I’ll attach pictures. Just curious to see if it’s normal or if I need to weld a piece back into it.