Welcome to Jetboaters.net!

We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

Click Here for more information>Ride Steady group buy for JetBoaters.net members only

You can dismiss this Notice by clicking the "X" in the upper right>>>>>

2012 vx110 Yamaha hull repair

Thread starter Schmitt
Start date May 19, 2020

S

Schmitt

Member

May 19, 2020

#1

Hey everyone,

Sorry if this is might be a dumb question. But I'm needing to repair the bottom and top of my vx110 hull. I know it's not the normal fiberglass hull an I need epoxy resin. But I'm wondering if i have to pull the motor out before i turn it over. So I can work on the entire bottom of the hull. Or if I can just drain all the oil and gas out and take the battery. Then turn it upside down? I'd rather not do this work over head lol. Thank you in advance and also any advice/ tips on repairing this hull would be great!