• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • JetBoaters.Net 2nd Annual SeaDoo Switch Group Buy Sponsored By JetBoatPilot Is Live Now. Save 25% Off Select SeaDoo Switch Gear through October 31st.

    Click Here to go to the Jetboatpilot Seadoo Group buy

    You can delete this notice with the "X" in the upper right>>>

2014 ALWELD 18/60 with Mercury 200hp outboard JET cavatates in reverse.

J

jayjourd

Member
Messages
1
Reaction score
0
Points
10
Boat Make
Other
Year
2014
Boat Model
Other
Boat Length
19
Ive checked the linkage, the reverse bucket for proper "locked in Rev", and the motor is approx putting 3000ish rpm when in reverse.(Thats as much as I'm allowed due to a stop in the throttle cable/ controller/shifter unit The boat will just about sit still. Now in FRWD its fine 5200 rpm and approx 48-56 mph plained out. Is there a govenor solenoid or something to prevent better rpm's, or could the carb linkage be out of sync ???? New to this kind of problem, need a solution.
 
Have you inspected the bucket to be sure it is moving to the full reverse position when in reverse. if you are pushing 3000rpm and no movement, it seams likely that the bucket is not locked fully down, and directing thrust back under the boat.

Best of luck though.
 
You must log in or register to reply here.
Back
Top