• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

    So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!

    You only have until September 30th to get in on this.....So Hurry!

    You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

2017 242X Steering limited after steering cable replacement.

HughSethner

Jet Boat Lover
Messages
12
Reaction score
0
Points
70
Boat Make
Yamaha
Year
2017
Boat Model
242X E-Series
Boat Length
24
Hi All!
First I read many posts and searched pretty deeply before asking this steering cable question.

I replaced my steering cables two seasons ago. And since it seems my steering is rather limited. I am seeing one and one quarter (1&1/4) turns from lock to lock on my steering wheel. So from straight to lock is only three quarters (3/4) turn on the steering wheel in either direction. I didn't use my boat last year so I can’t remember what normal is; but that seems like very narrow range.
What would cause this?
How many turns from lock to lock is normal?
I don’t see any steering range guidance in the maintenance manual.

Background:
When centered the nozzles are matched and centered. When I did the reinstall, I set the adjusters to the same number of turns onto the cables. Originally that was 14 turns in.
Pictures top full right, bottom full left. Does this look like full steering range?


IMG_4906.jpegIMG_4905.jpeg
 
Last edited:
Back
Top