• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

    So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!

    You only have until September 30th to get in on this.....So Hurry!

    You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

2018 Yamaha 242 hull drawing?

Renod

Jet Boat Junkie
Messages
181
Reaction score
369
Points
132
Location
Grosse Ile, MI
Boat Make
Yamaha
Year
2018
Boat Model
242 Limited S E-Series
Boat Length
24
Does anyone have a link to detailed drawings or measurements of the hull on the 242 line? I'm having a lift built and the contractor asked for width between the rails to avoid any hull damage.
 
Renod, When I set mine up I based the distance off of my trailer bunks. Mine a movable so when I went from my 05SX230 to the 13 242LS I was able to adjust them to the new boat.
Papa
 
Does anyone have a link to detailed drawings or measurements of the hull on the 242 line? I'm having a lift built and the contractor asked for width between the rails to avoid any hull damage.
What @Papa said^^

--
 
Papa always knows...
 
You might be able to using the stickers section of the service manual that shows the entire hull and try to scale dimensions.
 
You might be able to using the stickers section of the service manual that shows the entire hull and try to scale dimensions.

But be very careful if you decide to scale off the "vagina and rectum" sticker from the boat

:confused:;):D
 
Back
Top