• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

210 Challenger Install Help

aoshaosh

Active Member
Messages
2
Reaction score
0
Points
30
Boat Make
SeaDoo
Year
2010
Boat Model
Challenger
Boat Length
21
Looking for some help with my 210 Challenger. I am prepping to install a ski pylon kit on my 2010 210SE Challenger, and I noticed a difference in my boat.

My boat does not have the kit installed yet and the current post insert in the stern does not require much anchoring to the hull of the boat. Inside the engine compartment under the install point for the kit there is an anchor point for the the install kit (fabricated metal). I am including a pic of the anchor point in my boat, which does not have the post kit installed. I am also including another pic of the another boat I looked at , which has the kit installed..........I have circled in red 4 bolts that look to be providing more structural support. I do not have those on my boat.

For those of you that have the install kit installed, can you please let me know if your boat has the additional bolts and if so are you able to see how it is anchored on the other side of that wall. If possible and you have a chance could you send a photo or advise, the next time you happen to be in your boat.
 

Attachments

  • Other boat.jpg
    Other boat.jpg
    6.1 MB · Views: 8
  • 20210821_112455.jpg
    20210821_112455.jpg
    2.4 MB · Views: 7
  • 20210821_112625.jpg
    20210821_112625.jpg
    7.3 MB · Views: 6
If by chance anyone is pulling their boat out of storage... please have a look and see if your ski pylon anchor point is bolted down.
 
Back
Top