• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

6P6-8591A-01-00 ecu needed new or used

Lilyama

Active Member
Messages
3
Reaction score
4
Points
32
Boat Make
Yamaha
Year
2008
Boat Model
212X
Boat Length
21
Does anyone have a known good used or new ecu part number 6P6-8591A-01-00. I am in DFW. I will send my bad one to be rebuilt but hoping to find something to use my boat next week.
 
What problems are you having with it?

Where are you sending it to?
 
Injector #2 stuck open and dumping fuel into cylinder so it’s running extremely rich. Dealer replaced #2 injector and it didn’t change anything. Sending it out to Carmo in Cali.
 
Keep in mind that when I used carmo a few months ago, they sent my ecu to a European country to be worked on.
 
Keep in mind that when I used carmo a few months ago, they sent my ecu to a European country to be worked on.
I have been in contact with David. He told me if I got it to him by March 9th, there would be a two week turn around.
 
Back
Top