• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Anybody have a width measurement of the 190 series ski locker in the floor?

d_coyne1984

d_coyne1984

Jetboaters Admiral
Messages
1,015
Reaction score
965
Points
252
Location
Chanhassen, MN
Boat Make
Other
Year
2020
Boat Model
Other
Boat Length
21
I am looking for a cooler (or three) that will fit in the floor locker since I rarely carry skis any more. If anyone has an opening measurement (190 series), most importantly width, I would appreciate the info. I usually keep a hard-sided cooler under one of the seats and it's a pain in the ass since there is usually someone sitting on them.

I'm looking at this one from Bass Pro Shops (17" x 10" x 12.4"):

http://www.basspro.com/Bass-Pro-Shops-Soft-Side-Cooler/product/10207153/

Other recommendations always appreciated of course.
 
Last edited:
Here you go. Seems if you go 16"x12" you can fit before the gas strut on each side (front half, back half)

20160316_150031.jpg 20160316_150053.jpg
 
You are the man, thank you!
 
Try a soft sided cooler....should somewhat conform to the locker
 
This is one my list for this year too. With the wake racks I installed last year I can probably better utilize the locker. Thanks for the idea and measurement.
 
You must log in or register to reply here.
Back
Top