• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Best way to hide or fix this itty bitty scratch in my gelcoat?

haknslash

Jetboaters Fleet Admiral
Messages
7,585
Reaction score
9,030
Points
567
Location
Lake Martin, AL
Boat Make
Moomba
Year
2019
Boat Model
Other
Boat Length
23
So yesterday I rushed it too much docking and goofed hitting the dock coping. Thankfully the rub rail took most of the hit but my hull did smack the dock a little and left this scratch. It's not super deep but I can feel it with my fingernail so I don't think it could be buffed out. It's very small and above the waterline but me being a stickler and on a white hull, I'd like to know of a way to blend it in or repair it without a ton of work that I could potentially make it look worse by doing so lol. The white hull isn't a bright white but more of an off white color so not sure a white marker would work heh.
image.jpeg image.jpeg
 
Last edited by a moderator:
I was hoping for something a bit less involved but I guess I could tackle that job in the winter. Does anyone know spectrum color for the 2016 white? I tried searching for it on that ibosts link but couldn't find it.

Btw there's no risk of making things worse by it getting wet while I still boat this season? I'd rather repair when I put the boat away for winter in a month or so.
 
Don't let that end your season....boat on my friend. Almost looks like 90% of that would disappear with a quick wet sand to just that blackish mark.
 
It is above the water line. Make your repair over the winter.

If it were below the waterline I would suggest filling with marine epoxy then repairing over the winter.
 
I agree with @Murf'n'surf , there is a good chance that will buff out with a little wet sanding. Your going to need to get some ultra fine grit paper from a supplier to automobile paint shops. I would consider something on the order of 800 grit to start, and follow with 1200 and 1500. It is much finer than would be used on a repair, but your not wanting to cut too deep, just take the mark off. If you go deeper to get the entire scratch out, you may need the spectrum. I totally get the desire to make it disappear, and the quick wet sand will do that. A better repair can wait as all have said, heck, you can wait all together, or even leave it forever if you so chose...but you sound like many of us and want the boat perfect. I have used the spectrum on repairs much worse that that mark with success. Call Spectrum about color for the 2016, I suspect it is going to be a previous year off white.
 
Back
Top