• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Better lighting in bathroom - 2020 242 SE

bobholthaus

Jet Boat Lover
Messages
86
Reaction score
16
Points
77
Location
St. Louis, Missouri
Boat Make
Yamaha
Year
2020
Boat Model
242 Limited S E-Series
Boat Length
24
I want to put better lighting, and a switch h the door, in my storage compartment on the port side. Also, I want to add a 12v outlet and a dual usb outlet into the globe box, tapping the power from the existing light in the same compartment. Anyone have any good write ups on this? I installed my ICOM handheld unit in the glovebox today and want to power/charge it from a standard 12v outlet. And we always seem to need more phone charging ports, so I want to add a dual usb outlet as well. Any advice would be appreciated. I’m guessing I can surface mount most of the wiring in the storage compartment but I want to make it look at nice as possible. I’m thinking some kind of LED strip along the ceiling in there.
 
I added lights to both port and starboard rooms, on a door switch as well. I'm only finding the one pic, but I chose a fixture that had it's own switch in-case I wanted to leave the door open. I chose a sealed switch, which ended up being an overhead door alarm switch by Honeywell. But it worked.

IMG_1310.JPG
 
This will not help in your quest to add USB outlets, but I just purchased battery powered LED push on lights . Batteries last fairly long and I added Velcro to attach them. WorkEd out great and very simple, placed them on the inside of
the doors as you open door, just push on.
 
Check out superbrightleds.com. I have used them several times. Fantastic products!
 
Back
Top