Cobra Jet Fins on 2024 SX190

[ericullmann]

Curious on the group I have my 2024 Sx 190 setup with AK-19 system. I had the dealer install them and they set them to 5 and 6 vs 4 and 5. I havent noticed an issue with reverse so curious what settings everyone else is using as well.

 

[FattyMatty]

This is from Jeff at CobraJetSteering:

NOTE 4 AND 5 are the recommended setting for the best handling at all speeds for your model.

If you want the fins to go up at speed use the number 6 and number 7 positions This is the LEAST effective setting!



I always recommend using the down at speed settings like 4 and 5 for the 2019 and newer style nozzles and remember to place the nylock nuts on the outside of the fins if you have the deluxe version with the large plaining surface.


I have the ultimate AK19. Haven’t put it on yet but will be soon.