• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Reminder of the Thrust Vector and Lateral Thruster group buy through JetBoatPilot.....you only have Until AUGUST 31st. to get in on this group buy.
    With a Maximum discount of 35% this is the highest discount you can get on these, so don't miss out!
    So if you are looking to improve your steering-either forwards or in reverse.....this sale may be for you!  

    Thank you Will @jetboatpilot for offering this exclusively to JETBOATERS.net members!

    (You can click the X to the right to dismiss this notice)

Connext problem

Furnace man

Active Member
Messages
1
Reaction score
0
Points
30
Boat Make
Yamaha
Year
2020
Boat Model
Limited S
Boat Length
24
2020 Yamaha 242 limited S The last 2 trips out the starboard tachometer did not come on the portIMG_0879.jpeg side is fine. Both motors are starting and running fine. Checked all connections and fuses all ok. Any ideas would be greatly appreciated. Also anyone know where the engine data connections are??? Is there a way to diagnose the conext system can’t find any info.
 
Last edited:
Back
Top