• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Cooling Discharge Port

Wesley Cobb

Wesley Cobb

Jet Boat Addict
Messages
84
Reaction score
60
Points
97
Location
32579
Boat Make
Yamaha
Year
2017
Boat Model
242 Limited S E-Series
Boat Length
24
During a recent over-exuberant wash, I broke one of the cooling discharge ports off the hull. I am talking about the little gray, angled ports on the starboard side next to the bilge port. Has anyone replaced them and if so, how difficult was it? It seems it can be removed after unscrewing the retaining ring but, I didn't want to attempt removal until I knew how the little port was attached. Any advice would be appreciated. Wanted to post a picture but neglected to get one this weekend.
 
You must log in or register to reply here.
Top