We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Hello, first of all I want to apologize for my ignorance. My question is: the dip stick to measure the oil has two little holes, where does the oil have to be? Bottom hole? Middle of the holes? Top hole?
depends, is your boat in the water or on the trailer, is the engine hot or cold?
If you're on the trailer and the engine is cold normally you want it towards the lower mark. If you're on the water and the engine is warm anywhere between the two is OK.
Do yourself a favor and check your oil every trip, maybe when you stop to take a break during the day.
